Injector Issue - No Pulse in cylinder 2 and 3 injectors - Maintenance and Repair Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Injector Issue - No Pulse in cylinder 2 and 3 injectors
Sunday, June 25, 2017 6:31 PM
I have a 2004 LS Sport 2.2 Ecotec that sat for over two years (wrecked and never got around to fully repairing it, only body work). I would go out and fire it up and move it around the driveway every few months, but over the winter I didnt get the chance to start it. Come spring I went to fire it up and now it is running really bad.

First thing I did was put fuel stabilizer and new fuel in it, then also changed the spark plugs. Those didn't help. I pulled the injectors and cleaned them, also didn't help. I went and bought a code reader, its throwing a injector 2 and 3 error. I used an injector amp tester to test for injector pulse. Cylinder 1 and 4 are both getting nice pulse, but both injector 2 and 3 are not getting any pulses.

Next step is going to be replacing the PCM unless someone can steer me in the right direction. Open to any advice.

Thank you!

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search