Yeah I am working a few bugs out of my car too. Rear main seal keeps leaking. The fuel maps also need a little bit of tweaking too.
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
wtf the rear main? why? or has it been changed before?
ECOtec DOHC
It was changed once when the motor was built. It has leaked since then so i had Solid put a new one in. The new one leaked again. So I am going to do it myself this time.
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
hhhhmmmm o you already have a built motor??
ECOtec DOHC
Yeah the motor is built. Still stock cams and crank though.
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
dang. has soon has i get my car out. we all can chill. and that other guy. but dont laugh and play with me on the road since im not boosted yet lol.
ECOtec DOHC
I won't. I am not mean. I do however have HP Tuners. I could help you with some tuning. You would have to buy the credits though. I am out. We will need 2 to do your car they are $50 a piece. Just to give you a heads up. Later
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
we can tune it with stock form right now? if so has soon has it gets out the shop we can.... how do you buy the credits though..... since im from elpaso...well used to be. im on a forum called elpasoracing.com. some guy has an ss. cobalt. and was asking if somone knew how to tune off that. or something like that. i didnt know you had it though.
ECOtec DOHC
hey darryn how did you get the 140 speedo anyways
ECOtec DOHC
speedo is from black cat customs. They have quite the selection. You can also switch to a sunfire cluster too.
If you plan on going turbo then it makes no sense to tune it now. As for the the credits you can read about those on the HPTuners FAQ on there website. When you buy the product you start out with 8 credits once you use them you need to buy more. Once you get credits for a specific car you can tune that car an unlimited amount of times.
It is a pretty good deal. A bit expensive though.
Later
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
whats there website.i have a sunfire cluster in mine already.
ECOtec DOHC
Hey you guys i work at lovelace on base. and i saw an orange cave. with a kit. looked alright. here in abq there are alot of caves. my car is almost done. well all need to chill soon.
ECOtec DOHC
I am still working on getting my car back to great running condition. As of right now I have some sort of grounding issue that is killing my brand new battery every time I try to start it. So I don't know if it is just a bad battery or if it is something else. Once that is done I am going to work on my tune to get the idle back to normal. Then work on DFCO followed by the high RPM table. So this weekend will be a long one for me.
After that i am going to NY for 2 weeks.
D
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
dam you D! lol jk. hows the car runnin though? since its built what numbers do you got??
ECOtec DOHC
The car is doing ok. I have fixed the battery issue and stopped all the leaks.
I will wok on tuning this weekend. The car (with a crappy tune) is putting down 284.5 HP and 297.5 TQ
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
Yeah it pulls pretty good.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
darryn where you at? i just logged onto rsw!! they were mentioning your cavalier. do you ever hit up there meets on thursdays??
ECOtec DOHC
Yes I do frequent the Thursday night meets at Dion's. I should be there this thursday. I really wish I could get on RSW while at work.
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
well i wont be able to meet up yet. my car is still not done. and ill be in elpaso for a week. just makin sure. im new here so i dont want to go by myself...
ECOtec DOHC
That cool. Just let me know.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
hey darryn im sure i wont be gettin the turbo kit yet. cause of school and all. can we still tune my motor n/a on your hptuners. how much and how?
ECOtec DOHC
Well with out a wide band O2 sensor we cant tune any performance. We can change the speed limiter, rev limiter, fan on off temps, A/C clutch engagement RPMs, we could even tweak the timing a little bit. It will cost me $100 for the credits so $100 is what it would cost. If you have an automatic we can mess with that as well.
Darryn.
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
cool yeah. i think ima wait for the turbo. or slowly start gettin the internals for the motor. but i was thinkin of gettin the wideband. i know out here it runs slower due to the elevation. ima try to get the wideband soon. any brand you recommmend? etc. aem, innovative, zetronix?
ECOtec DOHC