2.4 twin cam in 2nd gen - Second Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
2.4 twin cam in 2nd gen
Tuesday, November 16, 2010 5:55 PM
has anyone tried this? i have been thinking about it for my dirt track car.. opinions or help would be great thanks

Re: 2.4 twin cam in 2nd gen
Tuesday, November 16, 2010 7:45 PM
I thought someone did it with a Beretta, but I've never seen a 2.4 powered gen 2. There was an ecotec swapped Sunbird so I imagine it could be done. I have no idea what you'd need to make it work aside from the usual swap things (engine, trans, ecu, wiring harness, etc.).


2010 Honda Fit LX
Re: 2.4 twin cam in 2nd gen
Thursday, November 18, 2010 3:51 PM
ya. i;m sure it would work.. just have to figure out the mounts and prob have to shorten or lengthen the cv shafts
Re: 2.4 twin cam in 2nd gen
Wednesday, November 24, 2010 2:41 PM
Lookup "Speedvisioncavalier", he did this swap with a Quad 4 or 2.4 I can't remember but it was a while back. Would make for a fun car



Re: 2.4 twin cam in 2nd gen
Thursday, November 25, 2010 2:56 PM
can;t find the profile.. does he still exist?
Re: 2.4 twin cam in 2nd gen
Friday, November 26, 2010 6:05 AM
SpeedvisionCavalier
That's a nice upgrade from the stock motor









Re: 2.4 twin cam in 2nd gen
Monday, November 29, 2010 6:11 PM
he hasn't been on the site in a while.. emailed but never got a response. anyone know of anyone else who has done this swop?
Re: 2.4 twin cam in 2nd gen
Tuesday, November 30, 2010 6:38 PM
Somewhere he did a short How To write up at one point. You'd have to search both here and on V6Z24.com to find it. I'm not sure if it's even around anymore....

.



Re: 2.4 twin cam in 2nd gen
Wednesday, December 01, 2010 7:58 AM
Re: 2.4 twin cam in 2nd gen
Wednesday, December 08, 2010 7:53 AM
Here is another writeup of his

Clicky

Hope that helps some






Re: 2.4 twin cam in 2nd gen
Wednesday, January 05, 2011 3:45 AM
I did the 2.3HO swap using his info as a guide. Started with a Beretta GTZ as a donar, and having the whole car helped.

Taking the time to carfully strip the GTZ of the harness was the key. The mechanical part of the swap was pretty straight forward.

Runs pretty good with a bit of nitrous.


.
.
Project S-Bird

Re: 2.4 twin cam in 2nd gen
Wednesday, January 05, 2011 10:27 PM
You have your own reasoning and personal tastes, but I've wondered since I saw the build thread originally: Why not use the Beretta GTZ body?


2010 Honda Fit LX
Re: 2.4 twin cam in 2nd gen
Monday, March 14, 2011 5:40 PM
wheelbase is the issue for me and u can;t find gtz around here
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search