Alright, sweet. Reason I ask, I need to do struts on my Sunfire, and if these are coming soon, I can wait out buying stock mounts.
I need an adultier adult.
Richard received the stock front Mounts and is going over everything. I'll update more information soon.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Good to hear! I'm excited for these!
Just waiting on Richard to finish up the design and make a prototype of each. 2.5" Fronts and rears have been made, and shipped out. I believe they have be installed on a test vehicle. I'll haven't heard a definitive answer on this yet.
I know he was working on building up a front and rear set to make sure the stock springs fit them correctly.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Oooh... nice, I'm not getting those but I'm excited to have them as an option when I get BC's later!
Can't wait for front pics!
how about fitting on koni yellows?
Magik1109 wrote:how about fitting on koni yellows?
The best answer I have received is to drill out the polyurethane bushing to the larger diameter.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I'm definitely in!!! is everyone sending payment now? or how is this going down?
We are waiting till the designs are finalized. The rear coil over design is 100% done.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I am soo ready i need mounts soo bad lol
I Love My J ♡
I'll probably start collecting the money for the 2.5" rears soon. 10 sets should be done shortly.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Coil-over version first, balls to that!! haha
Just kidding, but you got any eta on the others?
Michael, I don't come on here often enough to check the progress, so when they're finalized and you're taking payment, hit me up on the Book so I don't miss it. Evan Maddox, if you didn't know
R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Correct me if I\'m wrong but the rears would work an agx/pro kit set up with out having to drill out the bushing right? Sorry don\'t have both sets of struts in front of me to confirm the shaft diameter. The prokit springs should also work perfectly as well correct cause if i remember correctly the mounting point at the top is same as stock right? Sorry I have been away from it for a while and I would be interested in a set of rears if they would work i just want to confirm it first. Thanks for your replies in advance.
I believe Konis are the only struts that need the bushing drilled out.
forgot to mention I\'m in for coilover rears.
Im in
-MD- Enforcer wrote:
Rear Set: Stock / Lowering springs. - 4.25\" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4\" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
6.Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
7.Aaron Garcia - amgarcia2008@gmail.com - Aaron Garcia - 1- Paypal
8.
9.
10.
Rear Set: Coil over springs. Designed for 2.5\" Coil-Overs - Specifically BC Coilovers - 1/4\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.
5.
6.
7.
8.
9.
10.
Front set: Stock 4.875\" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
6. Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
7.
8.
9.
10.
Front Set: Coil over springs. Designed for 2.5\" Coil-Overs - Unknown drop at this time - $75.00-100.00
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Scorpio1 (James K.) wrote:Coil-over version first, balls to that!! haha
Just kidding, but you got any eta on the others?
I was told soon, but I have not be given a date.
Evan Undead (The Black Pearl) wrote:Michael, I don\'t come on here often enough to check the progress, so when they\'re finalized and you\'re taking payment, hit me up on the Book so I don\'t miss it. Evan Maddox, if you didn\'t know
Evan, will do.
aaron garcia wrote:Correct me if I\\\'m wrong but the rears would work an agx/pro kit set up with out having to drill out the bushing right? Sorry don\\\'t have both sets of struts in front of me to confirm the shaft diameter. The prokit springs should also work perfectly as well correct cause if i remember correctly the mounting point at the top is same as stock right? Sorry I have been away from it for a while and I would be interested in a set of rears if they would work i just want to confirm it first. Thanks for your replies in advance.
Should be just like stock.
Dante_k_late wrote:forgot to mention I\\\'m in for coilover rears.
Add yourself to the lists, or add your info, and I\'ll add you to the lists.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Rear Set: Coil over springs. Designed for 2.5\\\\\\\\\\\\\\\" Coil-Overs - Specifically BC Coilovers - 1/4\\\\\\\\\\\\\\\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.
5.
6.
7.
8.
9.
10.
These are ready to go. Price went down $45 plus actual shipping.....Yes. I know shocking.
You can buy them direct from
Richard Arraut.
(616) 893-1433
www.westshorefabricating.com
or
http://www.arrautmotorsports.com/
He will take credit cards or Paypal.
I will update everyone when the rest are done. Not 100% on other pricing yet.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Wow, that\'s a low price on those coilover versions! That makes me really wish I already had coilovers. haha
Here\'s hoping the others are similarly priced, that would be toooo sweet.
Now that I will be upgrading to BC\'s you have my attention.
Is there still time to put myself on the list for the rear mounts? When will you be taking payments and what is the ETA on the rears going out?
Just call Richard Arraut.
(616) 893-1433
Tell him you need 2.5\" coil rear solid mounts for your J-body.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO