Not trying to thread jack but I should be going to the dyno here soon also. hopeing to break 300. cant wait to c what you put down. everyone likes to talk crap about our eng
DRIVE HARD OR DONT DRIVE AT ALL!!!
i was coming down look out pass, which has a insanly steep grade. well the trailer brakes were not working at all so i just decided to say f it and go, i have powerslots on the truck, well i noticeced some brake fad on the truck and i came up to a sharp corner. couldnt stop, ended up locking up the fronts and going into a ditch at 60 mph. the car wasnt even scratched, but i need a new IFS front end for my truck and some bodie parts.
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
Sucks to hear about your truck. I see that you got hold of a camera. Now go take pictures of the cavalier!
--------------------------
NCR-SCCA
those pics are from the allstate guy, i got a vid camera now so i making a mini movie
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
Good luck when you hit the dyno.
But i still think your original "Camaro" dyno chart is total BS. I know your set up is probably capable of those #'s but judging by the dyno sheet posted (it's power curve) and your earlier replies it looks like a load of crap to me. Again, good luck on Wednesday, i hope you hit your goals.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
call what you want, i know what is will do.
[retty sure i got the tune spot on. A/F and everything is good and it pulls like crazy. roads are wet today and there is no full throttle, lol
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
Nice 2200 KavyKid. It's nice to see another LN2 rep'n.
MUST SEE VIDEO!!!!!!!!!!!!
SOLD!!!!!!!!!!!!
Yeh lets a video already.
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road
dyno tomorrow morning, then some vid editing, it will be up by friday. video of setup, street pulls, blow bys, in car footage and a dyno run with computer screen shot,
should help with the doubters
thanks for the support though guys
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
Hope all goes well! I would really like to see you hit your numbers!
SOLD!!!!!!!!!!!!
mmmmmm.........pushrod power.......
awaiting vids....
dyno was @!#$ today, i got what i thought was a good run going when the car leaned out really bad, so i am doing some tuning work right now and hitting it upp again later today
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
just out of curiosity... what'd it hit anyway?
Fall 08 Omaha/western Iowa area meet...
CLICK ME!
i just broke 275 and i watched the A/f drop to lean
cause- fuel pump gong out, it has enough gas to idle but as soon as you hit the gas it leans out. so swapping fuel pump tonight and we will try this again tomorrow, sorry for the wait boys
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
what about a boosterpump? just a thought.
When in doupt, grub.
i have a sumped tank and a inline pump now. the inline went out for some reason
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
Looking more and more like last week's #'s were BS, 100whp less and your fuel pump all of a sudden can't hang............
Good luck tomorrow.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
fuel pump was going tits up a while back, made 275 at 5,000 rpm. just starting to build good boost. wait till tomorrow and i will prove i can make the power.
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
well good luck tomorrow bro
^^^^^^ thanks bro, i am gonna need it.
stuff just hasent been going right for me lately
fully built 2200-TO4E T3/T4-HP tuners-373hp @18psi
Looking forward to the numbers. Can't wait to see what you can make.