Pic Request: Turbo + cooling - Page 3 - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Pic Request: Turbo + cooling
Thursday, July 23, 2009 8:16 PM
lol, well dave, i was talking with the welder friend, i can just get some straight tubing and have a 1/4 npt bushing/collar welded in so that would work just fine imo





Re: Pic Request: Turbo + cooling
Friday, July 24, 2009 5:10 AM
Damn, oh well. Looks like I'll have to come up with something.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Pic Request: Turbo + cooling
Friday, July 24, 2009 6:26 AM
Sorry for the delay guys,I'm totally swamped with work and don't have much time for the hobby stuff right now. I'm pretty sure the heater hoses are 3/4". I could make up a few Tee's if your not in to much of a hurry for them. Probably next weekend before I could get to them. I'll just turn them on the lathe and drill and tap for 1/4" pipe thread so you can use a barbed or pipe to AN fitting,depending on what you want to use for hose to the turbo.

Haven't had time to get under the car yet but here's a couple more pic's.







"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
Re: Pic Request: Turbo + cooling
Friday, July 24, 2009 8:08 AM
Thanks A LOT Gary. Yea If I could get two Tee's from ya. Ill pay you for your troubles

Im sure Scott is interested as well.

No hurry though, whenever you get to them.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Pic Request: Turbo + cooling
Friday, July 24, 2009 7:44 PM
i gotta figure something out lol




Re: Pic Request: Turbo + cooling
Thursday, August 06, 2009 7:54 AM
Bump

Gary, get a chance to make any T's yet?










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Pic Request: Turbo + cooling
Tuesday, August 18, 2009 6:25 AM
Thanks Gary for the T's!!

Question, out of these two hoses, which line is for the feed and which one is used for the return? Is the hose coming from the head the feed, and the one coming from the thermostat housing the return?












~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Pic Request: Turbo + cooling
Tuesday, August 18, 2009 10:31 AM
Nice Dave! Didnt know your turbo was water cooled as well.



Re: Pic Request: Turbo + cooling
Tuesday, August 18, 2009 10:35 AM
Mike, that pic is Gary's. Mine isn't water cooled yet. Doing that once I take all my turbo stuff off soon. Still collecting parts.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Pic Request: Turbo + cooling
Friday, February 21, 2014 11:36 AM
I have a question, I bought the heater tee off Jason but I cant figure out which heater line I use to install tee. The one on the firewall close to driver side or passenger side??

The other tee is connected in front of the motor on big radiator hose.


instagram: peru_stylez

Re: Pic Request: Turbo + cooling
Tuesday, August 12, 2014 6:47 PM
How do I go about purchasing some of those cool heater core T's for my turbo? PM me! Thanks!

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search