tC rims - Wheel and Tire Forum - j-body.org

tC rims - Wheel and Tire Forum

Forum Post / Reply
You must log in before you can post or reply to messages.

tC rims

Monday, January 25, 2010 8:51 AM

Anyone ever bored out tC rims to fit on a cavalier? Im able to pick up a set on craigslist for $80.

They have the same bolt pattern, but the center bore needs to be bored out 3mm.

Re: tC rims

Monday, January 25, 2010 10:46 AM

02_redbadged

its been done before! they look good on there as well!

WiGM-Tuners member.

Re: tC rims

Wednesday, January 27, 2010 3:47 PM

Qwik2k2z24

Bore it out! but run spacers. Their offset is TERRIBLE.

Just find a local machine shop to do it for ya. Shouldnt be a problem.

BeardLife / Club Awesome Reject Blog

Re: tC rims

Wednesday, February 10, 2010 4:39 AM

oldskool

I think you only need to take out 1mm on center. Doing it properly is expensive (machine shop labor), so make sure you really want them...

Re: tC rims

Wednesday, February 10, 2010 6:21 PM

Xavier Nava

i did it on my sunfire . if your good with a dremel your good 2. no vibration wut so ever

Re: tC rims

Wednesday, February 10, 2010 7:00 PM

Mr. Quick

Have a machine shop do it, unless they want a ridiculous amount. While you can do it by hand, and probably not have a problem, that's one of those things you should just do right or not at all. If a machine shop wants more than an hour's worth of labor to do it, they're raping you. I've had more than one set of rims bored out before, and paid about $50 each time.

Forum Post / Reply
You must log in before you can post or reply to messages.

Start New Topic Advanced Search