Wiring for power windows - Interior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Wiring for power windows
Wednesday, November 03, 2010 3:26 PM
Hey everyone just bought doors off of a 2004 cav with power everything. I have a 2000 sunfire with manual everything. I am wondering how to wire the power windows into my car?? Anyone done this before? Can you give me some ideas and help??




Re: Wiring for power windows
Wednesday, November 03, 2010 3:40 PM
dont mean to thread jack, but if also knows if its the same process or much different for a 95 - 99 cav
Re: Wiring for power windows
Wednesday, November 03, 2010 4:48 PM
anyone??



Re: Wiring for power windows
Thursday, November 04, 2010 11:43 AM
Come on people someone has to know this stuff !!



Re: Wiring for power windows
Thursday, November 04, 2010 9:02 PM
yea I would love to know about this to.
Re: Wiring for power windows
Friday, November 05, 2010 4:41 AM
yes i can be done, the power window system is stand alone. I did it to my 96 cav. just get you the doors or hardware and a haynes manual and check out the schematics in back of the book. Altho if i ever did it again i would probably jusst pull and interior harness from a power car.



Re: Wiring for power windows
Friday, November 05, 2010 7:21 AM
I pulled the wiring from the donor car. Just the stuff for the doors though, lol didn't wanna take the time to switch wiring harness so i have the window controller and the wires I just need a wiring diagram to see where to pick up power from.



Re: Wiring for power windows
Saturday, November 06, 2010 5:14 PM
honestly, i liked getting my aftermarket power window kit, installed it in about an hour and its faster than stock kits, plus i put my buttons where i wanted and got to keep the little cup behind the shifter.



Re: Wiring for power windows
Tuesday, November 09, 2010 6:57 AM
I used a aftermarket Spal system with the Stock switches,

Its just postive, negative and the gray is illumination



Mods: Synapse Charge Piping, Short Throw, Bad-Mab Dp, Dejon Intake, BYT Tuned!
Parts For SALE! Pacesetter Header(ECO),17'in Resonator, Alternator, Starter, Viper Alarm.
Re: Wiring for power windows
Tuesday, November 09, 2010 7:08 AM




Mods: Synapse Charge Piping, Short Throw, Bad-Mab Dp, Dejon Intake, BYT Tuned!
Parts For SALE! Pacesetter Header(ECO),17'in Resonator, Alternator, Starter, Viper Alarm.
Re: Wiring for power windows
Saturday, November 13, 2010 7:49 PM
i would have to agree with using the aftermarket kit.




Re: Wiring for power windows
Monday, November 22, 2010 9:01 PM
Aftermarket. I tried wiring a factory set up in my 98 Sunfire and had a ton of problems. (For some reason I had the pigtail under my little cup thingy already...) Even with having some of the wires already, they never seemed to work right. So finally I just swapped back to my manual windows.


----

Re: Wiring for power windows
Monday, February 28, 2011 12:55 AM
Anyone know of a good aftermarket power window kit for 98 cav that I can get in Toronto area


98 cavalier
Custom interior
Custom CAI
NGK spark plug wire set
2 12 in alpine type 2
Re: Wiring for power windows
Monday, February 28, 2011 1:52 AM
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search