Well after 2 weeks I have a little update
Put the rad shroud on like a week a go but never took pics till now
And the top dash pad was vinyl dyed
There has been lots and lots of sanding of interior parts, the lower part of the dash I hope will be sent to the painter in the next 10 days
some of the wiring has been ordered as of today lots more to go lol
two of these one positive one negative
one of these for the front with a 200amp fuse
17 feet of blue power and 17 feet of pearl silver ground of 1/0 awg wire
I wouldnt have gone with the KLM. Its copper clad aluminum and doesnt transfer current as well. Since aluminum has a higher resistance.
You probably wouldve been better off spending a little more on some full copper stuff.
I have used this stuff many times before and never had any issues I think it will be fine, hes not entering any sound comps with it so no worries with any issues. plus the blue is for power and silver is ground and will be running both to a battery in the back as well
Okie dokie
I havent heard any bad stuff about it. Its just preference I guess.
sorry jason I forgot to update that part, I changed it up so now there is no window its an open concept I just did a frame around them but the one in the middle on the bottom is covered up with just a window still. I should have some updated pics by the weekend
I like where this is going. That trunk is going to look awesome.
Little update
Im going in the morning to pick up the lower dash from the painters, should have pictures by Tuesday since my brother has a camera and I have to drop it off then
And my brother decided since there was a carbon fiber splitter laying around the garage that we tried last winter to fit to the car but it looked like poo. He decided to work with it and make something for the door panels. In the pictures it looks like it does not fit well thats because the carpet peice is still on there and needs a bit more sanding
man their is a ton of Carbon fiber on this car.....freaking awesome
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
love that color.
very nice cf column covers!
We all need somebody to believe in something...
your welcome now lets get the stereo part done and doors done and then send the dash pieces the bezel and other parts to get CF wrapped and then we can just enjoy the final look
almost there still lots to do before its ready but thought I would throw up what is doen so far still need to sand and paint the other sub box but you get the idea
wow that color is hott
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
and one with the stuff installed for a better idea
the parts on either sides of the amp that is in the middle is getting cutout and thats where the air compressors are going, also where the opening is at the middle amp it will be covered up by the air tank so you wont see that either
still lots more to do but first test fit went well
air didnt get hooked back up yet as the new compressor(480cc) has bigger fittings we need an adapter to make it work hopefully wednesday it will be runnning on air again
wow that looks killer great work....well done