nice work man!
I want to see this mounted in the car....
I wish i knew how to do this :/ would love to have some gauges just like that..simple
13.1 @ 115
Plz do a write up i must have
*****BLAME IT ON THE ALCOHOL*****
I can do some sort of write up, however since my cluster harness is already modded, pics won't match. I'll do my best to explain it... Keep an eye on the interior forum in a couple weeks. I'm still making space in my garage to start gutting the interior
I miss not being able to edit.... It took several months just to get this much clear... The other side is stuffed with random crap that has to go to the dump. I think this was built for trailer storage or something.
Awesome!! I was thinking about doing something very similar for the Cav.
Kardain wrote:I miss not being able to edit.... It took several months just to get this much clear... The other side is stuffed with random crap that has to go to the dump. I think this was built for trailer storage or something.
hoarder
looks good though. So will all this technically splice into stock wiring? Or how would one with say an 04 cav retro something like this into the factory wiring. Myself, like you, dont have emissions at all but would like the necessary warning lights to function properly if need be. would also be a great way to tie in more gauges that are deemed necessary. Or more so eliminate the stock tach since I have a digital one.
BuiltNBoosted wrote:Kardain wrote:I miss not being able to edit.... It took several months just to get this much clear... The other side is stuffed with random crap that has to go to the dump. I think this was built for trailer storage or something.
hoarder
looks good though. So will all this technically splice into stock wiring? Or how would one with say an 04 cav retro something like this into the factory wiring. Myself, like you, dont have emissions at all but would like the necessary warning lights to function properly if need be. would also be a great way to tie in more gauges that are deemed necessary. Or more so eliminate the stock tach since I have a digital one.
HA! My grandparents are the guilty ones for hoarding. I moved here after they moved out.... It's been a long, expensive, process to get things somewhat manageable...
Most of it can come off the stock wiring, other things like water temp input, tach input, need to come from external sensors.... couple weeks
Covered will be as much as possible as far as the wiring goes... I have access to the cluster wiring for all years cav/sunfire, so its just a matter of getting the time to sit down, curse at my laptop that has the program for the wiring diagrams for being a slow POS, and writing it up while crossing fingers that it doesn't shut down on me after 10 minutes. Off-hand, most of the warning lights are not able to be used. They are commanded on via either the PCM or BCM via the class 2 data wire (single wire). What you would be left with is just a minimum of indicators that are independently powered.
Makes sense. Also would want an odometer too. You peaked my attention. Just when you think my car would have been called done, this stuff comes up.
Yea that cluster is just about one of the nicest Ive seen for a cavy yet bro!! Great job..
red carbon fiber and red digital , nicely done
This speedo has an odometer built in. The mileage will start over at 0, but at least it's there.
One of the bad things about eBay is the wait time... But for $3 shipped, I can wait. This will make it easier to run power / ground / signal to the various gauges. computer extension cables, 4 pin molex for the gauges, fan extension cables for the indicators.
Man verry nice cant wait for the write up and part numbers
*****BLAME IT ON THE ALCOHOL*****