Said F it, doin a manual swap - Page 5 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Said F it, doin a manual swap
Monday, June 25, 2012 5:09 AM
Oh, I was told it could of been something in the valve body that failed. So, who knows.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Re: Said F it, doin a manual swap
Monday, June 25, 2012 5:54 AM
This is the solenoids used for 1st to 4th gear in almost every GM four speed.

1st gear - on - on
2nd gear - off - on
3rd gear - off - off
4th gear - on - off




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Said F it, doin a manual swap
Monday, June 25, 2012 9:14 PM
probably the sungears that failed. but just take a saw and cut that trans and get that diff out so this thing can be done.





Re: Said F it, doin a manual swap
Tuesday, June 26, 2012 4:38 AM
Yep doin that today Jason, I agree!










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Said F it, doin a manual swap
Thursday, June 28, 2012 3:16 PM
Yup, I dun did it!


Today I got the 2 3 holes drilled for the clutch master cylinder. I also installed a tilt steering wheel, that is a blessing.

Trey hooked me up with his 1 of 3 sets of Z24 red speckled front and back seats. Car is being transformed guys. This is the biggest project Ive done since the actual 2.4l swap back in 06. The engine bay is gonna be sprayed after its shaven and tranny mounts welded in. Slow progress is progress!











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Said F it, doin a manual swap
Thursday, June 28, 2012 4:06 PM
When do you want me there?



Re: Said F it, doin a manual swap
Thursday, June 28, 2012 5:58 PM
Nice work...




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: Said F it, doin a manual swap
Thursday, June 28, 2012 6:18 PM
Darren, after the body work is done

Thanks J










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Said F it, doin a manual swap
Thursday, June 28, 2012 8:08 PM
Keep up the good work, I'm not far ahead of you



Now on jack stands
Re: Said F it, doin a manual swap
Thursday, June 28, 2012 8:41 PM
Finally you have the correct number of pedals.


Error: Sig not found.

Re: Said F it, doin a manual swap
Thursday, June 28, 2012 11:40 PM
This thread makes me squeee like a little girl!!!!! And I had no Idea this wasn't originally a Z24!!!!




Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!


Re: Said F it, doin a manual swap
Friday, June 29, 2012 10:31 PM
lol @ no tilt stock



I choose the technology built for land speed records... not the technology built to save on emissions and gas mileage.
Re: Said F it, doin a manual swap
Sunday, July 01, 2012 9:42 AM
Nice. You're gunna love manual. I just bought a 6 speed Z06 and the difference between driving it vs my auto cav is amazing even though they both run the same times. Manual is so much more fun. Now I just gotta swap mine over like you so I actually want to drive the cav again.



12.6 @ 114.6 MPH

Re: Said F it, doin a manual swap
Tuesday, July 10, 2012 7:29 AM
I demand updates



Re: Said F it, doin a manual swap
Wednesday, July 11, 2012 5:52 AM
No real progress as of yet, car is going to my buddies house this weekend to get the mountes welded in. This is taking longer than I thought it would. We move next week from my 1 car garage townhouse into a new house, so been busy with that packing and stuff. I still need to Splice, solder and modify the new engine harness and body harness to my liking. This project will take me into the winter, mainly because my 10 month old doesn't let me out of her site. I don't mind, this lets me make sure the car is going to be how I like it.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Said F it, doin a manual swap
Monday, July 16, 2012 8:48 PM
Tranny is mocked in, mounts welded. Time to shave the firewall some, make the rack a manual one, and throw some paint here and there hehe














~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Said F it, doin a manual swap
Tuesday, July 17, 2012 3:15 AM
Whatcha going to do to make te rack manual?
Looking good dude.



Re: Said F it, doin a manual swap
Tuesday, July 17, 2012 3:37 AM
Looking good




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: Said F it, doin a manual swap
Tuesday, July 17, 2012 3:42 AM
I like your power steering lines.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Said F it, doin a manual swap
Tuesday, July 17, 2012 5:00 AM
Thanks Guys.
Darren, the easiest way to describe it is the two lines coming off rack will go into a billet breather filter, inside that breather filter will be a little bit of fluid. This enables constant lubrication and a way for air to escape throughout the breather. My fab guy has had this done for years without any problems. It should be done soon, so I will have pics of the whole setup.

Question, do the brake lines go in front or behind the rear mount stock?










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Said F it, doin a manual swap
Tuesday, July 17, 2012 5:22 AM
brake lines go in front of the rear trans mount




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren

Re: Said F it, doin a manual swap
Tuesday, July 17, 2012 6:08 AM
As for the brake lines, it depends which lines you are using. When doing a getrag swap and keeping the 95-99 lines, I run them behind the mount.



Re: Said F it, doin a manual swap
Friday, July 20, 2012 6:56 AM
gtpsunfire wrote:As for the brake lines, it depends which lines you are using. When doing a getrag swap and keeping the 95-99 lines, I run them behind the mount.


Are the lines different on 00-05's than the 95-99's or just personal preference on where to run them?? I know that the 00-05's run in front of the mount






Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: Said F it, doin a manual swap
Friday, July 20, 2012 11:29 AM
Yeah, the lines are different from 95-99 and 2000+.
When I do the getrag swap and keep the 95-99 lines, its easier to run them behind the mount.



Re: Said F it, doin a manual swap
Friday, September 21, 2012 7:59 PM
I'm sure the baby has been keeping you busy, but any more progress/updates?



12.6 @ 114.6 MPH

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search