Broken front end, so i put on what i could afford to fix it with.
Sweet
Building it one piece at a time
Here are some more pics, i also pulled the bigger 24mm front sway bar with some new polly bushings. There is the test fit for the seat. And some repolishing work
- Attachments
- 0129141735.jpg (24k)
0201142019.jpg (15k)
0130141228.jpg (35k)
How comes you mounted the kbrace upside down?
On the inside my car looks like a fighter jet.
How comes you mounted your kbrace upside down?
On the inside my car looks like a fighter jet.
I made it and the tabs need to be bent slighly to make it fit right, so for the time i just put it on upside down.
Oh ok.
On the inside my car looks like a fighter jet.
Got a spoilerless trunk and plastidipped it black until i can paint it red to match the car, also painted the sway bar i got a metallic purple, planning to do the grand am control arms the same.
- Attachments
- photo-1.JPG (224k)
photo.JPG (278k)
What year camaro did the back seats come out of? And what did you have to do to get it installed? Are the front seats also out of a camaro? Nice!
Fronts and rears are out of a camaro. the rears were available like that between 95-02 i do believe, may have stopped in 97. I will be doing a write up on the swap once i get everything in there right, taw as just setting everything in there. as of now i have about 1/3 of the swap fully figured out. But its not looking to hard.
I love the way ths car is going. Interior has so much potential!
Update:
Got another sunfire front end painted and ready to be put on, did pretty good concetering ive never painted anything,
Also got my fender braces that i made installed,
Got the clutch issue figured out,
Aluminum flywheel is installed,
Center console has been picked out for the rear,
Aluminum power steering rack bushing was put in.
Polished intake tube,
Cleaned SAAB 36# injectors
I think that's it....
- Attachments
- 0410141934a.jpg (291k)
0421142118.jpg (292k)
0422142156.jpg (189k)
2014040895192701.jpg (106k)
0410141935.jpg (184k)
Nice work so far! Hope you enjoy having an aluminum flywheel more than I did.
"In Oldskool we trust"
New bracing, Let me know if your interested in a set. I am currently unsure if they will fit the quad 4's or 2200's but its a no drill needed install.
- Attachments
- 20140429_180512.jpeg (1107k)
Cool what does the front mount to though? I can't quite tell from the picture. What's the improvement like with the bracing on?
2002 Pontiac Sunfire SE Sedan 2.2l Ecotec 4 Speed Auto.
Makes the cornering feel stronger (feels better through the turn), and it mounts to the radiator mount bolt holes under the plastic cover.
Do you have part numbers for the floor mats? I would love to get a set of those but I can't find them anywhere.
2002 Pontiac Sunfire SE Sedan 2.2l Ecotec 4 Speed Auto.
