IF YOU ARE RUNNING A 14.0 QUARTER MILE OR BETTER AND ARE COMING TO THE BASH THIS YEAR, POST YER NAME AND CURRENT BEST ET..
Ok guys... its time to get the bench racing started.. I wanna know how many of you sub 14sec guys are showing up to the bash this year... post em up!!!
1.Hybridcav, Greg Margison, 13.87@98mph
<img src="http://www.hybridcav.com/images/sigmay.gif">
I think if the peeps on the top 5 lists all showed up, It would take a car running 13 flat or so to be in there. I know I wouldn't make it. But out of those cars, some aren't running at the moment, and many won't be there, including myself, due to family needs. Good luck, but I think it's gonna take better than 14's to get in the quick 8.
<img src=http://ourworld.cs.com/jwithspray/Nitrosig13303.JPG>
Karo? U goin? Anyone else?
<img src="http://www.hybridcav.com/images/sigmay.gif">
theres a ton under 14 that are going chances are its gong to take mid 13 or better to place
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
I'm sure it will take a mid 13 or better... I would just like to hear how many are going to actually show.
<img src="http://www.hybridcav.com/images/sigmay.gif">
Too far man, I am in Florida.
If I could trailor my car then yes, but otherwise no. I don't think DJ(13.2) is going neither.
If they made it in like Alabama it would be on. lol
Best time:"""11.946""" @ 114.73 mph @17psi 1.83--60"
11 second daily driver!!!!
Race Related 727-561-9440
Shop of choice for your 11 second J body!
Also, built bottom end and or top end LSJ and L61's available.
13's
----12's
----11's
----10's
At the pace the my engine freshening is getting done, it's going to be a stretch, but you never know. The CF hood and trunk are MIA, thus I have no hood and trunk at the moment either, the stock pieces are being used to make the molds.
I need the raceday schedule, most likely I'll tow down that morning and head back after the racing is done.
Has the 3.8 turbo 2nd gen confirmed attendence this year?
I plan on going for the first time ever this year.
Best time is a 13.754@ 104.39mph.
Best mph is just under 106
but i plan on running better times than that this year
If your interested in custom aluminum tilt wheel levers hit me up!
Jbodyho, hope to see you there. Would be nice to see you make a couple passes down the strip.
Karo, Why aren't u going? Was looking forward to seeing you run..
boostedeco, hope to see you there 2...
<img src="http://www.hybridcav.com/images/sigmay.gif">
Hybridcav wrote:Jbodyho, hope to see you there. Would be nice to see you make a couple passes down the strip.
Karo, Why aren't u going? Was looking forward to seeing you run..
boostedeco, hope to see you there 2...
Mike, let me know if I can in anyway to make sure you get your car out there.
As for me . . . well . . . 2200 miles each way . . . @ current gas prices . . . no thanks
Quote:
As for me . . . well . . . 2200 miles each way . . . @ current gas prices . . . no thanks
Valid point...
<img src="http://www.hybridcav.com/images/sigmay.gif">
jbodyho wrote:
Has the 3.8 turbo 2nd gen confirmed attendence this year?
why? Is it only worth going of it's there?
<img src="http://www.oneqwkz.com/frank/franksig.jpg">
I am going to go.
Current Timeslip so far this season:
My time is on the Right Side.
See everyone there.
Later,
Jeff
--------------------------------
2000 Turbocharged Silver Z24 5spd
Cardomain Site
Karo (Car Customs) wrote:Hybridcav wrote:Jbodyho, hope to see you there. Would be nice to see you make a couple passes down the strip.
Karo, Why aren't u going? Was looking forward to seeing you run..
boostedeco, hope to see you there 2...
Mike, let me know if I can in anyway to make sure you get your car out there.
As for me . . . well . . . 2200 miles each way . . . @ current gas prices . . . no thanks
No worries Karo and appreciate the offer! Find me some 430 222 cams, that would be a great help. I here Engle can grind them, but haven't called yet.
I've been reworking the front suspension, shortening the struts, springs, etc. It should be back on four wheels this week.
I stopped buy the machine shop yesterday to drop off the ARP stud kits, saw the copper gasket, oringed block, etc. He handed me a bad exhaust valve. It appears the stockers are getting eaten alive at the seats due the healthy doses of nitrous. SI Stainless valves are now on order along with LS1 springs. He promised to have it ready by the end of the month. We'll see
T-R-S Josh is making up a header, but I'm down the list a bit.
Two pages of small projects to execute before the engine comes back. I'll be busy, but it's manageable...
.
.
Project S-Bird
Im gonna try like hell to be there this year again. Last year I didnt race b/c I didnt have the car tuned yet.
I figure ill be in the mid 13s by the bash... Lower if I get the slicks like I planned and get things tuned up to 20psi...
Dan
YEP, my 60' times suck
247HP/267ftlbs at 13psi with built motor
Project updates and stuff:
www.clubhousecustoms.com
email: dhc1902@yahoo.com
jbodyho wrote:Karo (Car Customs) wrote:Hybridcav wrote:Jbodyho, hope to see you there. Would be nice to see you make a couple passes down the strip.
Karo, Why aren't u going? Was looking forward to seeing you run..
boostedeco, hope to see you there 2...
Mike, let me know if I can in anyway to make sure you get your car out there.
As for me . . . well . . . 2200 miles each way . . . @ current gas prices . . . no thanks
No worries Karo and appreciate the offer! Find me some 430 222 cams, that would be a great help. I here Engle can grind them, but haven't called yet.
I've been reworking the front suspension, shortening the struts, springs, etc. It should be back on four wheels this week.
I stopped buy the machine shop yesterday to drop off the ARP stud kits, saw the copper gasket, oringed block, etc. He handed me a bad exhaust valve. It appears the stockers are getting eaten alive at the seats due the healthy doses of nitrous. SI Stainless valves are now on order along with LS1 springs. He promised to have it ready by the end of the month. We'll see
T-R-S Josh is making up a header, but I'm down the list a bit.
Two pages of small projects to execute before the engine comes back. I'll be busy, but it's manageable...
Mike,
Should have asked I have the SI valves here . . . . .
Also. . . the cams you asked about.. not sure.. what about stock w41 cams with new lifters? LOL
Lots of mid 13 cars goin... thats kewl.. I'm throwing my trak lites, slicks, stall converter & exhaust on this week... Hoping to take that 13.8 down to mid 13s or better... seems like there will be alot of close racing.... But it also looks like Jbodyho has everything covered if he shows...
anyone know if skillz (black turbo toyo cav) is showing up?
<img src="http://www.hybridcav.com/images/sigmay.gif">
Jeremy will be there, Karo should shut up and show up
Any news on Randy Wynn possibly showing? he'll have a beast, I heard he's either close or already is running again
Yea I just wish everyone could go always a bunch every year id like to see go but they can never make it
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
indianapolis, Indiana
If your interested in custom aluminum tilt wheel levers hit me up!
yep im not going lol thats to far.. what if i break down over there
good luck to you all that do go, and may the best driver win.. or the fastest j-body
-DJ
