Leafy (Club Jeffie FEA man) wrote:SLO CAV (autocrossing dude) wrote:Yeah the quarter mile thing is not correct. It says after my le5 mani, 36# injectors, tune, 60mm tb it says I ran a 18 sec lol my old 2.2 ln2 3 speed ran that lol.
Yeah, now I dont feel so bad. DO we want to say it reads about 2 seconds slow then?
More like 4. My car with out the mani and injectors ran a 15.4 so..... Yeah..... also the Dev was awesome at first but I've asked like 15 times for injector duty cycle and no one has answered me yet....
Well it must be a percent thing since there's no way I ran a 12.2.
1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by:
Kronos Performance
WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
i love this app so so so much. i think its pretty accurate too.
I now have injector duty cycle woot!
here is what you do...
On the main screen of torque press your phones menu button,
Go to settings,
Scroll to manage extra pids/sensors,
press menu,
select add custom pid
enter the following minus quotes
obd2 mode and pid "221193"
Long name is "Injector Duty Cycle"
Short name is "Inj Dty" or what ever you want
Minimum value "0'
Maximum value "100"
Scale factor "1X"
Unit Type "%"
Equation "((((A>8)+B)/65.535) * [0C]) / 1200"
obd header to use "Auto"
coo....programmed it in!!!!!! is this for any injector? or for a certain size?
does the scale need to be 1x or x1?
It shows your injector duty cycle in percent. If you get near 80-85% then it's time to upgrade. That isn't injector specific. But it Is GM only.
Scaling is x1 just leave it what it's set to.
Edited 1 time(s). Last edited Friday, September 02, 2011 11:51 AM
SLO CAV (autocrossing dude) wrote:here is what you do...
On the main screen of torque press your phones menu button,
Go to settings,
Scroll to manage extra pids/sensors,
press menu,
select add custom pid
enter the following minus quotes
obd2 mode and pid "221193"
Long name is "Injector Duty Cycle"
Short name is "Inj Dty" or what ever you want
Minimum value "0'
Maximum value "100"
Scale factor "1X"
Unit Type "%"
Equation "((((A>8)+B)/65.535) * [0C]) / 1200" is this a "zero" or an upper case "o"
obd header to use "Auto"
Edited 1 time(s). Last edited Friday, September 02, 2011 11:50 AM
doesnt seem to wanna work for me?
Make sure you have 4 ( at the front of the equation also make sure good didn't put any quotes in it.
it works and reads, but is not where near accurate
Weird. Do you have HP tuners to verify it not being correct? Mine reads right
no i dont have HPT. ill have to double check the entry in torque. are you sure that the equation isnt for a certain size injector?
yes it does not matter on injector size. is it reading anything? whats the duty cycle at 100% wot? on my hptuners on my car with the le5 intake manifold and saab green top injectors i hit like 50-60% and on torque i hit 50.1 today at wot...
the duty cylce at WOT is only reading like 24% and i know that is not right. Ill check again tonight. ill also check on a different l61.
Yeah I'd check your equation. That can't be right
it is identical to what you told me to input for everything. like i said ill check it again tonight and see what happenes. where did you get the info from. any way you can screen shot and show EXACTLY what you entered?
I emailed the dev. I can do as screen shot but I'll have to do it at home.
it seems to be off by a multiple of ten ...is the "1X" supposed to be "10X" or a 10? i ran it on the way home and was pulling 6.7 to 8.0 % on it. seem to be right if multiplied by ten.
Weird..... Mine is at 1x
Here is the best I can do for now.sorry the are sideways idk why.it's not like that on my phone and I had to take this pix from my wifes HTC aria.
Here is the first part
Second
Close up of equation
Edited 1 time(s). Last edited Wednesday, September 07, 2011 10:07 AM
the rquation you typed in is wrong... you have a>8 in here, and a< 8 on your phone!....ill fix it and give it a go tonight.
Here is an edit with the right info...THANKS!!!
SLO CAV (autocrossing dude) wrote:here is what you do...
On the main screen of torque press your phones menu button,
Go to settings,
Scroll to manage extra pids/sensors,
press menu,
select add custom pid
enter the following minus quotes
obd2 mode and pid "221193"
Long name is "Injector Duty Cycle"
Short name is "Inj Dty" or what ever you want
Minimum value "0'
Maximum value "100"
Scale factor "1X"
Unit Type "%"
Equation "((((A<8)+B)/65.535) * [0C]) / 1200"
obd header to use "Auto"
Edited 1 time(s). Last edited Wednesday, September 07, 2011 1:31 PM