Halo projectors - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Halo projectors
Sunday, October 06, 2013 4:06 PM
Alright, so I realize I have no ground wires in my 1998 chevy cavalier. I have two wires for the parking lights and turn signals and two wires for the high beam and two for the low beam. I know which wires I'd like to connect to but, as for grounding the wires....how do I go about that?

Re: Halo projectors
Tuesday, October 08, 2013 4:22 AM
FIrst of all, this should be in the exterior or audio and electronics forum (most wiring questions go there)

Second, you can always ground by simply running the ground wire to a bolt that goes to the body or engine. The main ground for the engine is right there on the drivers side at the front of the engine & transmission. Get yourself a loop connector if you don't already have one, crimp it on, and bolt it down.





Re: Halo projectors
Wednesday, October 09, 2013 3:47 PM
Much obliged. Still pretty new to the forum so general just seemed to fit
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search