Since the weather was nice this weekend, I was motivated to get in the garage. The Cav is now on wheel dollies so I can somewhat easily move the Cav around the garage. I finished wiring 3 8ft sections of T8 light fixtures for the car half of the garage. Once I get the wiring harness labeled and removed, I can finally pull the motor and trans
I picked up this Sparco wheel and Momo hub quite a while ago, so they finally made it to the Cav. Once I had it test fitted, I think I will get a NR
I bought Fetter's center console several months ago too. I am unsure if I am going to leave it as is, or paint the top Cayenne Red ( I am leaning towards painting it )
I washed the Evo hood and hung it up with the stock one
Jason
99 Z24
LG0/LD9 for Life
![](/global/images/emoticons/ay.gif)
10 Year Bash Veteren
ohh very nice. only thing i dont like is all the colors in the interior. youve got tan, graphite, chrome, cayenne, and white. lol
![](http://i139.photobucket.com/albums/q289/fast97z24/image_1352654833076488.jpg)
It's nice to be injected but I love being blown.
-Z Yaaaa- wrote:ohh very nice. only thing i dont like is all the colors in the interior. youve got tan, graphite, chrome, cayenne, and white. lol
I'm with this guy but I'm sure you are aware of what's going on!
I say leave the center console as is and paint the defrost vent graphite.
BeardLife /
Club Awesome Reject Blog
I like your peddle covers. yes I said it!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Qwik2k2z24 wrote:-Z Yaaaa- wrote:ohh very nice. only thing i dont like is all the colors in the interior. youve got tan, graphite, chrome, cayenne, and white. lol
I'm with this guy but I'm sure you are aware of what's going on!
I say leave the center console as is and paint the defrost vent graphite.
Yeah, the colors are alittle all over the place. Stock interior color is grey. I am going to replace the entire dash pad with a stock black one. Also thinking about going back to stock HVAC and fog light controls
If I leave the center console Fetter's gun metal grey, I think I would have to repaint the gauge bezel to match??
Jason
99 Z24
LG0/LD9 for Life
![](/global/images/emoticons/ay.gif)
10 Year Bash Veteren
Blwn LD9 wrote:Qwik2k2z24 wrote:-Z Yaaaa- wrote:ohh very nice. only thing i dont like is all the colors in the interior. youve got tan, graphite, chrome, cayenne, and white. lol
I'm with this guy but I'm sure you are aware of what's going on!
I say leave the center console as is and paint the defrost vent graphite.
Yeah, the colors are alittle all over the place. Stock interior color is grey. I am going to replace the entire dash pad with a stock black one. Also thinking about going back to stock HVAC and fog light controls
If I leave the center console Fetter's gun metal grey, I think I would have to repaint the gauge bezel to match??
Maybe just paint the arm rest and leave the rest graphite on the console.
BeardLife /
Club Awesome Reject Blog
Glad to see a update.m
If you did a graphite dash, and top cover I think your dash bezel would be fine and leaving the console as Fetter did it would be fine.
I also say go away from white face on all your gauges.
FU Tuning
I love progress!
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Addicted to meth wrote:Glad to see a update.m
If you did a graphite dash, and top cover I think your dash bezel would be fine and leaving the console as Fetter did it would be fine.
I also say go away from white face on all your gauges.
Funny how trends come and go. We have been here long enough to see them all,
Jason
99 Z24
LG0/LD9 for Life
![](/global/images/emoticons/ay.gif)
10 Year Bash Veteren
Blwn LD9 wrote:Addicted to meth wrote:Glad to see a update.m
If you did a graphite dash, and top cover I think your dash bezel would be fine and leaving the console as Fetter did it would be fine.
I also say go away from white face on all your gauges.
Funny how trends come and go. We have been here long enough to see them all, ![](/global/images/emoticons/ag.gif)
Right. I had white face gauges in my cav. Did away with the overlay on the cluster, just put in a wideband gauge and did black, but still my oil pressure and oil temp is white.
FU Tuning
Addicted to meth wrote:Glad to see a update.m
If you did a graphite dash, and top cover I think your dash bezel would be fine and leaving the console as Fetter did it would be fine.
I also say go away from white face on all your gauges.
Yes to all of this. If the bezel is he only red painted piece I wouldn't be mad.
BeardLife /
Club Awesome Reject Blog
Just to bump my own thread, though I have not done much. I have not had much free time, but I am not that motivated at the moment
What could I be up to now
Took a GMSC PCV baffle and tapped it for -10an fittings
Jason
99 Z24
LG0/LD9 for Life
![](/global/images/emoticons/ay.gif)
10 Year Bash Veteren
Nice, I should of used AN fittings on mine...
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Looks great.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I have been following the PCV thread that Sweetness made years ago. I still have to drill and tap a 3rd hole in the plate for the check valve line
Jason
99 Z24
LG0/LD9 for Life
![](/global/images/emoticons/ay.gif)
10 Year Bash Veteren
I guess I should update my own thread
I just got my turbo back from being rebuilt and upgraded. Hahn rebuilt the turbo and upgraded to a 20g and larger turbine housing. Wastegate is 8-10psi
Jason
99 Z24
LG0/LD9 for Life
![](/global/images/emoticons/ay.gif)
10 Year Bash Veteren
Great strap it to a motor and build some boost.
FU Tuning
nice coating on that turbine
turbo looks great man!
keep going! you'll get this car back on the road yet!
![](http://i139.photobucket.com/albums/q289/fast97z24/image_1352654833076488.jpg)
RIP silver car. You will be missed.
Looks good man.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Addicted to meth wrote:Great strap it to a motor and build some boost.
I agree. Duck Tape is the best way to attach boost parts!
I just read this whole thread, and this is so clean and awesome!
Did you say my car looks slow??
Addicted to meth wrote:Great strap it to a motor and build some boost.
Not quite yet. I still have a lot of things to do before that happens. I may strap it to the stock motor so I can mock up charge pipes
Spencer wrote:nice coating on that turbine
Thanks...It turned out better than I thought. Too bad the exhaust manifold and downpipe may end coated in black
-Z Yaaaa- wrote:turbo looks great man!
keep going! you'll get this car back on the road yet!
I am slowly getting there.
Jason
99 Z24
LG0/LD9 for Life
![](/global/images/emoticons/ay.gif)
10 Year Bash Veteren
Another package arrived
Just like everything else.....this will not be left alone either. I will probably start a separate thread for that
Jason
99 Z24
LG0/LD9 for Life
![](/global/images/emoticons/ay.gif)
10 Year Bash Veteren