i saw something on here about the 4 or 5 buck mod to get rid of that terible cel...i tried searching and found alot of information about it but unfortunately nothing telling me how to do it or were to get the parts...i did find a site that was supposed to tell me how to do this but for some reason i could not access it

Ok, go to autozone, advance auto, Pep boys. Go to the help section. You need part number 42002. It is a spark plug antifouler. 2 come in a package. They should be 18mm. You will notice that they have small holes in them. On one of these drill that out with a 1/2 drill bit, maybe one size bigger. You need to be able to screw your O2 sensor into it. I recommend unscrewing your rear o2 sensor, and making sure if fits. Once you have the whole drilled out screw the sensor into that one, then screw the sensor and anti fouler into the other anti fouler (this one you DO NOT drill out)., screw the whole thing back into your exhaust. You will need to reset your ECU. You will not get anymore CEL (if you do not have a cat, or a hi-flow cat etc...). Email me, or hit me up on AIM if you have any other questions.



FU Tuning

ya its just a test pipe...so i dont have to rethread anything? it sounds wonderful...lol...been chasing down this problem for a couple of weeks...with out you guys helping me i would be lost...its nice to belong....