Hey org,i need some help.A few months ago i bought an injen intake off a member here,well i have it on,but it sits to high,its rubbing the insulation on the hood.
So this is where i need your help,anybody have a close up pic of how its supposed to mount to the tb on a 2.4?
Right now i have a coupler between the tb and intake,but from what i can see on the net,its set up different,its hard to find a clear pic of how injen designed it to mount.
So if anybody can help me out i would appreciate it.
post a picture of how you have it setup.
I had a ractive intake and it did the exaxt same thing....2 years later with the s/c and a modified intake with no rubbing you can still see the indent in the insulation on the hood from the old intake. Not sure if its a common thing but it happened to me, I wasn't too worried about it cause it wasn't hitting the hood.
u probly need to
a: cut the coupler down an inch or so that attaches to the tb
b:cut the aluminum tubing that goes into the coupler and inch or so.
i had to do this with mine or my hood would'nt shut properly.
you could always just remove the insulation from your hood......
WildCard wrote:you could always just remove the insulation from your hood......
it will still rub
Im a Xbox 360 fanboy...and damn proud of it!!
blue02zee24 wrote:http://s753.photobucket.com/albums/xx176/blue02zee24/?albumview=grid
Does this work?
much better thank you
you sure the rubber seal is all the way over the TB and the metal coupler is in the rubber seal?
Im a Xbox 360 fanboy...and damn proud of it!!
Yeah its tight around the tb,but as you can see i cant cut the rubber anymore,if i can lower the pipe over the tb then it might not rub as bad.
I just want to see how injen designed it in the first place.
And insulation stays,need to fix the intake,not the insulation.
did u just bump ur thread in the same day? lol
try cutting the plastic that's going into the coupler if u can't cut the coupler. just my suggestion. and i'm just telling u what i had to do with mine, which was'nt an injen so u might wanna find another solution bfore having to cut the actual intake piping, but that's what i had to do.
Yeah i bump quickly lol. Anyways,surely somebody has a pic ,i know i cant be the only person with an injen intake?
i had one and it rubbed too. i guess just deal with it
Im a Xbox 360 fanboy...and damn proud of it!!
