I need to make a flat gasket out of cork or whatever for my intake manifold. 2.4 style. I keep ordering them from OEM because he laser cuts them but I want to be able to make them so I can have one ASAP if I need it. It would be nice to have a drawing that I could use to cut one myself and have it ready to go on before I disassemble everything.
Something like this, in .dxf or whatever, or at least with some measurements so I can draw my own .dxf and plot out.
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
Payment sent for one. I appreciate it. I just wonder what to do if you aren't able or willing any longer, haha. You're my only dealer.
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
Still, does anyone have a .dxf or at least measurements?
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
With that drawing you should be able to measure your manifold and get it done. Or maybe, just maybe, draw the gasket once you get it from Mark.
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
I measured the bolt spacing and scaled the drawing up and made a DXF. My co-worker can laser cut it using our facilities. If it comes out well, I'll post the .dxf.
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
Converted it into Solidworks for giggles.
I didn't how ever check the scale...Should be 3/8" thick in the model.
Edited 2 time(s). Last edited Monday, July 02, 2012 11:12 AM
- Attachments
- ld9 intake flange.JPG (138k)
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
why do you keep using them up?
I choose the technology built for land speed records... not the technology built to save on emissions and gas mileage.
My manifold is removed occasionally.. and I like to replace the gasket if I suspect a vacuum leak.
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
Nice. Ive been thinking of making one for the exhaust as no one has posted one yet.
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
does anyone know where i can purchase a 2.3 to 2.4 conversion adapter plate?
Here
________________________________________.
Still not low enough for a signature.
[ion wrote: C2]My manifold is removed occasionally.. and I like to replace the gasket if I suspect a vacuum leak.
Is this the one you keep buying? at 99.00 a pop??
http://www.overkillengineeringmotorsports.com/24ld9phad.html
Im looking for a cork style one as well. Mine didnt hold up very well.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
I assume he's just buying the $6.50 gasket and not the adapter everytime.
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
