Up for sale I have Brand new unless noted
Eagle Rods
Wiesco Pistons, Overbore 8.9:1 compression
OE MLS HG
ARP Headstuds
LZ BS delete kit
Zex wet Nitrous kit wet(bottle has pressure guage) USED
Bottle blanket USED
Purge kit USED
used log turbo manifold (T3/T4 w- 38MM external flange)
3" DP custom with ford 5bolt flange USED
Complete custom welded 2.5" intercooler piping USED
CSS injectors (used)
Aeromotive Fuel Pressure regulator USED
Saab Intake manifold USED
4 sets of main bearings (OE)
Complete seal kit
Comp Cams turbo cams
GM TMAP sensor w/ harness USED
Intercooler USED
This costs me well over 3,000 for everything listed.
MAKE OFFERS
More to come, I am interested in trades for cash/streetbike (Preferably an 08+ Ninja 250)/Complete stock ecotec engine
If you have a bike I'm interested In I will trade everything I have minus the turbo/WG/HPT and a few T bolt clamps and couplers and all the new stuff I have will be included
------------------------------------------------------------
will also trade for a front/rear LSS bumper cover in Arrival Blue
------------------------------------------------------------
Decided to give up on the Cav?
mmmm eagle rods, so tempting, what do you have for the 38mm wastegate? i need a new one for this season
Trevor Blesh wrote:Decided to give up on the Cav?
Yes, I love modding cars but I have been turned to the DSM darkside, I would LOVE to get my cav going but its just not feasible when I have a talon that I can do much more with for half as much cash.
Vince, Someone has already shown interest and has requested that I take a deposit to hold the rods, if not then I'll sell them to you for 275 shipped.
As for the wastegate, I have a TIAL 38mm that I'm going to be using on my DSM, If you have the Log manifold I'll give you my atmoshperic dump for it as I will no longer need it.
------------------------------------------------------------
cavmania wrote:Trevor Blesh wrote:Decided to give up on the Cav?
Yes, I love modding cars but I have been turned to the DSM darkside, I would LOVE to get my cav going but its just not feasible when I have a talon that I can do much more with for half as much cash.
Vince, Someone has already shown interest and has requested that I take a deposit to hold the rods, if not then I'll sell them to you for 275 shipped.
As for the wastegate, I have a TIAL 38mm that I'm going to be using on my DSM, If you have the Log manifold I'll give you my atmoshperic dump for it as I will no longer need it.
Seems like a cost effective decision, not to mention the fact that the aftermarket out there for the DSM trumps anything that ever will be available for J-Bodies.
Do you plan on keeping the Cav after you find a motor or selling it?
damn, had a feeling you were going to get away from the cav.
check the omaha thread for some bad news
I believe I can see the future... as I repeat the same routine....
Ok, Up for sale I also have HPTuners, it has no credits but will tune all 2005 cavaliers.. I currently do not have it but I'll be looking to sell it sometime soon... Looking for 325$, if you credit 1 car you're looking at 375$ to get it up in running, unless of course you have a 2005 cavalier
------------------------------------------------------------
Eagle Rods/ARP studs/Nitrous kit/ gone..
BS delete pending..
I have been making pretty decent deals on this stuff guys, most of it is brand new!
------------------------------------------------------------
huh??! credits cost 99. 325 and 99 is 424.
I believe I can see the future... as I repeat the same routine....
Woops, Make that 300 for the HPT than..
------------------------------------------------------------
i just need a new wastegate is all. may have a line one one so far. mine is open dump as well.
Cams/Pistons are on Ebay..
------------------------------------------------------------
Do you happen to have pics of the intercooler piping? Does it come w/ the couplers/ t-bolts?
what version of HPT is that you have?? I am VERY INTERESTED!!!
]:-> 287 TimeSlips In Hand. Car Still Runs Strong... 3 Differentials Later ]:->
how much for the tmap with wires, and injectors, do they come with the harness?
here is a picture of the I/C pipes.. They wrap around where the stock overflow tank would be, (I use a Saab overflow on my car) through the intercooler then around where the windshield tank would go and then up and around my battery ( 26R) and to the TB. They will not come with All the couplers and no T bolts.. it is flanged for a greddy type S
I'd be willing to sell the TMAP/Connector and injectors for 100 shipped$ The ss injectors plug into the stock harness I believe.
pm me if interested Adam.
------------------------------------------------------------
Sent payment for Rods and ARP head bolts. Thanks for holding them for a few days.
bump..
------------------------------------------------------------
bump.. looking for 325 for the cams and 325 for the pistons... will sell both for 600$ shipped..
------------------------------------------------------------
Any word on the dp? price?
Price on LZBS kit. PM me.
Still in the car, Icemike.. probably not coming out till spring..
Mr Choo, the BSD has already been sold, sorry
------------------------------------------------------------
if only those where sc cams and not tc cams
