Yonaka Ronins seats
They are synthetic leather (aka pleather) with blue stich.
I will include the custom steel brackets or provide the specs for you to make your own.
They are currently in my 02 Cavalier which is in storage. Will pull from the car at request.
These are in great condition.
MSRP: $700
Price: $400 obo
Memphis Amp 16-MC500D
RMS Power 4ohm 250 x 1
RMS Power 2ohm single 500 x 1
S/N Ratio >95dB
Variable Low-Pass Filter 50-250Hz
Variable Subsonic Filter 20-50Hz
Input Sensitivity 250mV-5V
Fuse Rating 25A x 2
Dimensions 6.5" x 2 " x 10.4"
MSRP $850
Price: $300 obo
Memphis 15" SHP subwoofer 15-SHP15
Nominal Impedance Znom ohms 2 (x 2)
DC Resistance DCR ohms 1.68 (x 2)
Resonant Frequency Fs Hz 29.7
Mechanical Q Qms 4.8
Electrical Q Qes 0.352
Total Q Qts 0.33
Xmax (linear) in 0.467
Xmax (mechanical) in 1
Sensitivity 2.83 volts dB 93
Voice Coil Diameter d in 3
Voice Coil Length hvc in 1.4
Voice Coil Layers n 4
Voice Coil Type Dual
Continuous Power watts 500
Maximum Power watts 800
Magnet OD in 7.5
Magnet Thickness in 2
Magnet Weight oz 192
Frame OD in 15
Mounting Hole in 14
Mounting Depth in 8.25
Speaker Weight lbs 39
Surround Thickness mm 1.7
Driver Displacement cf 0.29
Sealed c.f. 2.00
Vented SPL c.f. 2.50
Round vent for 55Hz in. 6" x 6"
Slot vent for 55Hz in. 6" x 6" x 8.75"
Alternate slot vent for 55Hz in. 4" x 10" 13.5"
Vented Low Tuning c.f. 2.6
Round vent for 38Hz in 4" x 8.75"
Slot vent for 38Hz in. 3" x 6" x 12"
Alternate slot vent for 38Hz 4" x 8" x 30"
Price: $400 obo
Ractive Gauges
I have 2 gauges one is the volt and the other is boost.
Includes all mounting hardware.
Price: $50 obo (Both)
I have given some guideline prices. Feel free to make decent offers.
You may have to lower your standards on those seats, since it looks like people can still get a pair of brand new ones for $255 in the group purchase.
Shop Manuals, Brochures:
www.kenmcgeeautobooks.com
Sorry guys... Seat Price was a typo on my part
Asking $300
These include steel seat brackets.
All prices are CND obviously.
In terms of the GP @ $255 they do not include mounting brackets.
Cost from the GP would be $335 US Shipped - Exchange $390 CND
Hey I'm interested in your racing seat ... $ 300 for pair with the steel seat bracket includes ?
Yes, that's correct.
Jeff, are you still driving the: 2001 Chevrolet Cavalier Z24 Coupe? The only reason I ask is that my last brackets didn't work in a 97 or 98 sunfire but I don't see them being a problem in a 2001 Cav as I have an 2002.
Yeah i still driving 2001 Chevrolet Cavalier Z24 ... so what do u need from me ?
I just wanted to make sure the brackets were going to work. That's all.
Any offers from the amp, sub or gauges?
Price Updates:
Amp: $250
Sub: $350
Ractive Gauges: $40
Let's get these gone.
Any chance you'll sell the brackets serparately ? I don't have means to fabricate new seat brackets, don't wanna cut the stock brackets, and I have a pair of Yonaka seats, just trying to find some brackets that'll work ... Curious...
How soon are you looking for a set. I have the specs and I can fab up a set.
SilentKav wrote:How soon are you looking for a set. I have the specs and I can fab up a set.
give me a price and asap lol I'm tired of my friends heads hitting the roof in the car. 2 door 01 Cavalier if that helps. Yonaka Samurai style seats are what I have.
hey man, where in ontario are you? im in buffalo. very interested in the seats. how close are you to the peace bridge? im about 10 mins.
Joey his car is about 10 mins from my house if you want them I can bring them down to Niagara when i pick up my car
Kinda new with everything here...but what would i need to fit those seats into a 02 sunfire? I know id need the brakets, but would i have to get them made? Could i buy them? Or what...Im very interested inthose seats!
Tom Norman wrote:Kinda new with everything here...but what would i need to fit those seats into a 02 sunfire? I know id need the brakets, but would i have to get them made? Could i buy them? Or what...Im very interested inthose seats!
He's currently selling them WITH the brackets, so technically speaking all you'd need is money and means to get them if he sold them to you lol
Blinddemonz: Let me check out material costs. I make my brackets out 1/4" material. Would you perfer steel or aluminum?
Here is the pic for one of the brackets.
I'd prefer steel. Do these brackets work with sliders?
The sliders bolt to these brackets yes.
Alright thought so, just makin sure
Lemme know the price, also where are you located?
