Well, I'm going to clean my throttle body..yep clean it .
So i wander to the Auto Zone , turns out they dont have it.
Next on to GM dealer, nope not found.
Then to bumper to bumper, "well were not showing it on here , sir"
So i call Summit racing , nope
But i got fel pro's phone number. Well im kinda thinking this is
I havent took the throttle body off yet, so heres my qeustion.
2.0 turbo motors do have throttle body gaskets, correct?
Next Where the hell do i find one of these things?
I know Fel Pro makes one but don't know the # off the top of my head. I think I got one at NAPA once too if memory serves me. You could always cut one out of gasket paper if you really had too.
Tony
Tony
1987 Sunbird GT turbo convert
Ported intake, Fiero 53 MM TB, 52 lb inj, ported and flowed head, tube header, Mitsu TD06, ARP rod
bolts/head studs, adj cam sprocket, 4" x 12" x 31" FMIC, Paxton AFPR, modified 125 trans/LSD
unit/3.42's, custom chip tuning, Alky Control Methanol injection
13.61 ET at 101.44 mph, 262 WHP/350WTQ
2009 Pontiac Solstice GXP roadster, 2.0 turbo w/GMPP exh, CAI and turbo upgrade, 290 hp/325 ft lbs
1969 Olds 442 convert
400 Eng, 200-4R trans, 3.73 posi, power everything, OAI
Fel pro has it. But you have to special order it IIRC, I found it nowhere anywhere at any parts stores. . I ended up using my stock one with some RTV spread lightly on it.
Quote:
Fel pro has it. But you have to special order it IIRC, I found it nowhere anywhere at any parts stores. . I ended up using my stock one with some RTV spread lightly on it.
IIRC? What's that?
I called felpro they said nope they did not have it.
I went to napa they said they have it,but it didnt look right to me..im picking it up tommorow.
I'm probably going to use my stock one also.
I guess ill be making me one..where do i go to get the material to make me one?
You can get the paper at Napa or whatever parts store you frequent. The kind I've used is called Velum or Vellum. I forget who makes it but I wouldn't be surprised if Felpro makes it or a version of it. They come in diferent thicknesses too.
Tony
Tony
1987 Sunbird GT turbo convert
Ported intake, Fiero 53 MM TB, 52 lb inj, ported and flowed head, tube header, Mitsu TD06, ARP rod
bolts/head studs, adj cam sprocket, 4" x 12" x 31" FMIC, Paxton AFPR, modified 125 trans/LSD
unit/3.42's, custom chip tuning, Alky Control Methanol injection
13.61 ET at 101.44 mph, 262 WHP/350WTQ
2009 Pontiac Solstice GXP roadster, 2.0 turbo w/GMPP exh, CAI and turbo upgrade, 290 hp/325 ft lbs
1969 Olds 442 convert
400 Eng, 200-4R trans, 3.73 posi, power everything, OAI
