I have my air rde set up but the quick release that comes from the strut is leaking, the hose is cut straight so that is not the problem and they are push in as far as they go. What else can I check? Any help is appriciated.


I have the Auto Pilot hooked up its pretty nice so far even with the leaks


JHound
I took a Grey Hound bus to the 2005 GMSC Bash

http://memimage.cardomain.com/member_images/9/web/501000-501999/501209_5.jpg

its probably not leaking from the quick connect end. its probably leaking where it threds into the strut. get a bottle of soap water and spray the fitting. that will tell you where the leak is

^^^^werd


-Brandon

Nope its from the end of the braded hoses where the quick release fitting is. I checked it and plus I can feel it. The hoses are cut straight but jsut doesnt want to seal correctly still.


JHound
I took a Grey Hound bus to the 2005 GMSC Bash

http://memimage.cardomain.com/member_images/9/web/501000-501999/501209_5.jpg

try pulling it out make sure its not able to come out by itself with out pushing on the release. only thing i can think of for what ur saying

could be a bad fitting. that little metal cylinder in there could be causing the leak. i had to replace one of mine on my tank because of that