Does anyone know the size of the stock wheel studs, I am going to be ordering some ARP studs to work with some spacers, and need to know some measurments so I can get a part number.
They need the knurl diameter and length, the length of the stud, the nose length, and they thread size.
ARP measurment description
You need either part number 100-7708 or 100-7713
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Thanks, I will go with the 100-7713 as it is a bit longer, making it better for use with spacers.
7713 is 3.250 inches long just so you know. The stock is about 1 inch long. I have the 7708 and it is plenty long enough if you have spacers.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Did you guys ever find out the stock wheel stud measurements? I found out 100-7708 or 100-7713 ARP studs wont fit my hub.. The knurl is too small for my hub.. Those knurls are .509, I read ours is .685.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
OK, scratch that .685 crap.. Wrong info.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
I have the 100-7708 studs in my living room right now, I will try and install them next weekend probably... I will let you know how it goes.
^^Be prepared to take em back, because I just tried installing mine and the knurl is too damn small.. Grrrr.. Maybe I just have some freak arse wheel hubs
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
I picked up a stock wheel stud this morning for a couple of bucks, I will compare it to the ARP ones I have at home when I get off work. Could someone explain how I can properly measure the knurl?
Sorry, I had autozone hubs on my car.. Thats why the ARP ones didnt fit... If you have OEM hubs on your car, these ARP fbody studs will fit.. But if you have autozone, or advanced auto hubs they wont fit..
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
