Hey guy's need a little help figuring out which lines hook up where.
In this picture, which set of holes are for the front brakes and which are for the rear brakes?
Which braided steel line hooks up to the front master cylinder hole and which to the rear?
"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
gary the non abs unit you have their , screws in identical to the 00-05 with abs , and i think the lines each have a different thread
(1) Master Cylinder Primary Brake Pipe
(2) Master Cylinder Secondary Brake Pipe
(3) Master Cylinder Primary Brake Pipe at Proportioning Valve
(4) Master Cylinder Secondary Brake Pipe at Proportioning Valve
(5) Proportioning Valve Brake Pipe to LF Brake Corner
(6) Proportioning Valve Brake Pipe to RR Brake Corner
(7) Proportioning Valve Brake Pipe to RF Brake Corner
(8) Proportioning Valve Brake Pipe to LR Brake Corner
try this
- Attachments
- abs routing.gif (98k)
Thanks
"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
(5) Proportioning Valve Brake Pipe to LF Brake Corner
(6) Proportioning Valve Brake Pipe to RR Brake Corner
(7) Proportioning Valve Brake Pipe to RF Brake Corner
(8) Proportioning Valve Brake Pipe to LR Brake Corner
- John, any chance you know the threading on each of those hook ups? I have 2 out of the 4 lines still connected to mine from my donor car, but i am missing the other 2. I'm trying to get them all so i can get them to -3an fittings for braided lines.
Any help would be much appreciated. Thanks!
i hooked mine up the same as it was stock
R.I.P. Brian Klocke, you will never be forgotten
