hi!
i have a couple of questions regarding this swap.(yes!!i searched and red the sticky a million time)
but i got lost at some point(french canadian...)
i have acess to a 1993 chrysler concorde with the rear disc setup. for 75$ i can have everything i need to do this swap
here's my 1st question:
can i use: caliper bracket,dustshield,caliper & hardware from this vehicule(1993 chrysler concorde)
or do i absolutly need dodge neon parts??
and can someone give me parts number from Napa for every fitting i need for this to work
and if someone could give me the exact measurment so i could give them to the machine shop it would be a big help!(i cant find it)
thanks guys!!
!pıɐן ʇǝƃ oʇ pǝǝu noʎ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
-_-_-_-JCO EastSiderZ-_-_-_-
I belive everything your asking has been covered in the sticky, including a list of cars you can use the rear brakes from. All the measurments and parts needed are there. I had to go through 20 some odd pages to do my swap lol. I know it sucks but everything is there for you!
"Straight roads are for fast cars, turns are for fast drivers"-Colin McRae
ok ill try to read it again
!pıɐן ʇǝƃ oʇ pǝǝu noʎ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
-_-_-_-JCO EastSiderZ-_-_-_-
(2) EAR-989534ERL - the hardline fitting adapter
(2) EAR-997634ERL - the 7/16" banjo fitting (you will use the stock banjo bolt on the caliper)
(2) EAR-63010126ERL - the 26" SS line (you can also try using the 24" line, but it might be a little tight for comfort)
Those are the fittings and lines I used for my swap. I am using everything from a 96 neon sport so the fittings may not be the same to attch the brake lines to the calipers. the concorde calipers.
You can use the rears from a concorde it appears. Here is the list with all the vehicles you can use.
2001 - 2006 PT CRUISER
2004 - 2006 SEBRING
1995 - 2005 NEON SPORT
2005 - 2006 STRATUS
Calipers:
CHRYSLER
1995 - 2000 CIRRUS
1994 - 1997 LHS
1993 - 1997 CONCORDE
1994 - 1996 NEW YORKER
1989 - 1995 LEBARON
1996 - 2000 SEBRING
DODGE
1989 - 1990 DAYTONA
1989 - 1990 SHADOW
1993 - 1997 INTREPID
1990 - 1995 SPIRIT
1995 - 1999 NEON
1995 - 2000 STRATUS
EAGLE
1993 - 1997 VISION
PLYMOUTH
1990 - 1995 ACCLAIM
1995 - 1999 NEON
1996 - 2000 BREEZE
1989 - 1990 SUNDANCE
For the machining of the bracket all I did was bring a old wheel bearing to the machine shop with me. They were able to make measurments of the bearing and drill the bracket for me.
"Straight roads are for fast cars, turns are for fast drivers"-Colin McRae
thanks bro!!
!pıɐן ʇǝƃ oʇ pǝǝu noʎ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
-_-_-_-JCO EastSiderZ-_-_-_-
do i really need to put that 2psi valve??(reading that how to can get confusing...)
!pıɐן ʇǝƃ oʇ pǝǝu noʎ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
-_-_-_-JCO EastSiderZ-_-_-_-
Nope no valves needed mine work fine on the stock residuel pressure valves
