I purchased the Eibach Sway Bars for my 02 sunfire GT and i have installed addacos on a cavi before and we had to cut the 2 bolts holding the power steering rack on to install it since his cavi did not have a front sway bar already on it... Now i have a factory sway bar on mine... am i going to have to cut the bolts as well or will i not since i already have a factory sway bar installed?
you shouldn't have to cut anything either way
Really? then why are some people saying you have to in there instructions?
Cinny wrote:you shouldn't have to cut anything either way
Wrong. The bolts hit the bar.
its an old concept. time for something new to take the reigns. - Z yaaaa
What about the Eibach? and with my gt set up?
so not matter what u have they hit?
Yes, do to the size and location of the bar.
its an old concept. time for something new to take the reigns. - Z yaaaa
I have the 25.4mm / 1'' Addco F/R bars on my GT and I didn't have to cut anything.
>>>For Sale? Clicky!<<<
-----The orginal Mr.Goodwrench on the JBO since 11/99-----
I have the Addco 1" bar and didn't have to cut or grind anything
just put the bolts in and fined out...if they hit cut em. If your capable of dropping a sub frame to get a sway bar in i'm sure ya'll can shorten a bolt.
