I installed Tokico D-spec struts with Eibach sportline springs and have uneven height measuring from the ground to the top of the fender/quarter panel. I didn't measure it before doing the swap but here are the measurements...
Front Driver = 25 3/4"
Front Passenger = 25 1/2"
Rear Driver = 26 1/8"
Rear Passenger = 25 1/2"
They've only been installed for a little over 100 miles. The differences don't seem big but if you look you can tell from side to side. Just wondering if this is out of the ordinary and if not do I just have a sligtly shorter rear passenger spring? Thanks in advance.
not to mention uneven weight distribution from the car naturally. and uneven ground
well, the font passenger side is heavier than the front drivers side because of the location of the engine, I couldnt tell you why the back is as different as it is. Did you try measuring it while there was someone in the driver seat?
1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by:
Kronos Performance
WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
the ground is perfectly level concrete in the garage...didn't measure it with someone in the driver seat...i'll just let it go through the winter and see where it is in the spring
