Okay, after many questions and still some confusion about the bracket that i need to buy, i have come to the conclusion that i need part number 22660396 for the bracket. My question is, do i need part 24 in the picture? the bushing? Does the eibach set come with this? or do i have to buy it from the dealer? Also, do i need to buy specific bolts? I know this picture will clear things up for people who can explain it to me, as i trust you guys over the guys at the parts counter at the dealership.
Thanks
From what I understand, all the bushings come with the Eibach kit. You just need to buy 2 of those brackets and 2 bolts for those brackets.
yeah that part number looks good, double check it with the dealer with your vin, you never know what dumb thing the factory changes without tell you.
anyone any idea on the part number for those 2 bolts?
I ont take the crack about parts guys personally since i am one. the part number for the bolt you need is 11516328 list price is 1.41 ea you probably have to buy 5 m10x1.5x30
is the size
Suspension FAQ (05/22/2005) wrote:Swaybar choices
FRONT
-18mm stock FE1 bar (stock on 95-99)*
-22mm stock FE2 bar (stock on 2000-2002)*
-24mm stock FE3 bar (stock on 2003-2004)*
-25.4mm addco bar
-25.4mm eibach bar (-sold in combo with their 22mm rear)
-26mm mantapart.com bar
local place = custom bar
****kinda like the 3rd gen is still a 3rd gen from 95-04, but have series 1 (95-99), series 2 (00-02), and series 3 (03-04).... the suspension of "FE2" has a series 1 (00-02) and series 2 (03-04) ....the 2000 - 2002cars still run FE2 style 22mm front bars, the 03+ cars just have a 2mm upgrade.******
Part Numbers for Clamps and misc stuff if you car did not have a front bar stock
Quote:
I went to the local Chevy Parts Department today, and got a list of parts I'll need to install an FE2 bar on my FE0 Cavalier ... Here's the list he gave me:
2 Clamps 22660396
2 Insulators 22619843
4 Bolts 11516328
2 Links 22657718
courtesy of Josh.
Hope that helps.
2000 2200 Cavalier: 9/14/2000--10/23/2006
2007 G85 SS S/C: 10/23/2006--Present
Vote for me at
Motortopia.com! Thanks!
yeah forgot to mention i finally got around to updating that.... my bad
yeah and if you dont have a sway bar stock, then make sure you run a tap down the holes in the subframe to make install much easier, the holes are probably full of crap and paint and what not.
Ive seen a few post about this and figured i would add that to this thread.
I need to get some sways for mine, then my suspension will be done.
Mike
1992 GMC Sonoma GT #492. Oh, Its just a stock V6!
1999 Cavalier Coupe, daily driver, 2200/M5. Mods and pics are in my registry.
Sombody Needs to Make me a cool Sig, Because im Sig Challenged!
Support the site that supports your habit, Go Premium.
Im premium since January, but why doesnt it say that?????
