i have an 05 cavalier and i installed a HID conversion kit the other day. They work but on the dash it shows that the brites are on , i didn't cut or splice any wires it was just plug and play, can somebody lend me somebody help me out on this problem?
same thing i have since putting hid's in.... just gonna put tape over the light....hehehe
My car is a 2004 with the "high/low" HID's. I don't have any lights on in my cluster. But then again, I have disabled my DRL's. That could potentially be the why the "indicator" light is on. There's a great tutorial on how to disable the "DRL's" on here. I would check that out.
i got the bi- xenon plug and play it was suposed to be anyway right now i just took out the drl relay and going to do the bypass w/ the grounding the dark blue wire but havent yet FYI dont get anything from showglowlights.com or eurofx they suck real bad!!
i would like to be able to switch between low beam and high beam ... preferably low beam so i can use my fog lights which in the future i would like to convert if i ever take care of this situation
so if I get a HID low beam kit my brights or DRLs wont work. thats awesome, if i have HIDs who needs bright lights, and DRLs suck!
