hey guys
i am having trouble with my drivers side front turn signal .. i noticed lastnight when driving home that the 194 bulb works on and off , when it stays on ..i have no turn signal what so ever and the bulb is off and the flasher light stays on .. when its off it works perfect .
i never had a problem with this before .
can someone help or know what this problem is
thanks
Change the bulb. If when you turn on your park lights the indicator in the cluster is on for the turn signal, change the bulb. To find out which bulb needs changed, turn on your flashers/ hazards, walk around the car and see which bulb isnt blinking.
Sometimes water will get in the light and in the socket causing a poor connection also, so keep that In mind when you pull the bulb.
01 cav w/01 3400 gam gt 4t45e
i will check the bulb tomorrow but the little bulb keeps comming back on and off ... inside the car the turn signal stays on .. then it goes off and everything goes to normal ... then it does it again . seems like i loose connection or something but i will check that bulb first and replase it
just went out today and changed my small 194 bulb and rplaced it with a new one , still has the same problem soo it wasnt the bulb that was causing this problem . when i have the headlights off its fine and works perfect but when i flick them on the little 194 bulb in the front turn signal goes out and causes the full drivers side turnsignals to NOT work at all .
i have no idea what is wrong with this .
can someone help please.
thanks
Sounds like you have either a burnt out signal in the front or the rear one is out..Just turn your hazards lights on and walk around the car what ever is not flashing is burnt out..Also Some sunfires had issues with the rear light sockets,But I would check all the bulbs first..
When I had my saturn sc2 I had a problem like that, bulb wasnt burnt out at all. Took some digging but turns out it was a broken wire in a little 6 inch section between the socket and connector. Swapped it out for a known good one and that was the problem. No physical signs of breakage at all, maybe take a multimeter and check the voltages?
