If there is a method to installing the camshaft and all the titanium parts and springs please let me know. since the head needs to be opened. cant i just pull the head, work, then reinstall? i do know how the factory removal and installation works, pull the motor etc, but i don't own a cherry picker. Thanks, Warren.

you definitely don't have to pull your engine to install cams, or springs. and you don't need to remove the head either. simply remove your timing cover and valve covers remove your cams. remove your spark plugs and get an airline fitting that will screw into the spark plug hole then you compress the cylinder enough that the compressed air will hold the valves up you can then remove and replace the old valve springs, just make sure you do one cylinder at a time unless you have 4 airlines! lol