well right now i have 1 amp and 2 subs but recintly i got a 2nd amp of the same kind... what im trying to do is have 1 sub and 2 amps.... here is the specs of my amp remeber i have 2 of these oh i dont want jl.... and the amp face has to look clean..
A8000T mono amplifier
» 400 watts RMS x 1 at 4 ohms (800 watts RMS x 1 at 2 ohms)
» cooling fan
» variable low-pass crossover (50-120 Hz, 18 dB/octave)
» variable bass boost (0-18 dB boost at 45 Hz)
» preamp-level inputs and outputs
» 11-5/16"W x 2-5/8"H x 13-1/4"D
Good luck with the two seperate amps and 1 sub. Since the amps cant be straped you are gonna have to set the gains and everything perfectly or you will blow the sub. Best bet would be 2 4 ohm DVC subs. That way you can run each amp to each sub at 2 ohms.
What more is there to tell, he explained it perfectly. 2 subs, 2 amps, each amp runs a sub. Dual 4 ohm voice coil sub in parallel gives you 2 ohm. Voila.
---------------------------------------------------------------
http://www.cardomain.com/id/lanman31337
Sponsored by:
JLCaudio.net
well i can run 2ohms at 800 rms a piece so if get a dual voice coil 1600 rms sub one coil on one amp and another on the other amp....
don't run one sub off two amps...thats just dumb
wysiwyg wrote:i would say they bang, they don't really pound so much. but if
you want to bump, then they will bump and hit real hard and a lot good. 
LOL
it is possible, but you have to have both amps tuned just right or else you'll cook your speaker.
---------------------------------------------------------------
http://www.cardomain.com/id/lanman31337
Sponsored by:
JLCaudio.net
As i told you just go with two subs. It will be louder and less chance of frying things. I would go with maybe 2 12" L7s or 2 12" type Rs or what ever you budget allows.
If you are looking for a bad ass sub woofer though, i would recommend either Digital Design or even Kove Armageddon's. PowerBass Extreme is a bad ass sub also.
Cavi sedan ls (justin u) wrote:Chris H wrote:don't run one sub off two amps...thats just dumb
how is that dumb?
i did it. I ran two 1000bds to an RE XXX then i ran four 1000bds to 2 XXXs. And they all were set the same its not a difficult thing to do. takes time yes. but not hard at all
sorry i didnt mean dumb, i meant difficult
wysiwyg wrote:i would say they bang, they don't really pound so much. but if
you want to bump, then they will bump and hit real hard and a lot good.
LOL
Hell if you want to get technical you could run 4 amps to 1 sub. BOO YAH!
---------------------------------------------------------------
http://www.cardomain.com/id/lanman31337
Sponsored by:
JLCaudio.net
