Also i didn't factor in the forum discount as i dont know what it is for ED stuff, what kinda discount do we get?
bumpity bump bump, need suggestions ppl
.... since awhile im pretty sure. As JL quoted in an earlier post
JLAudioCavalier(1bad02cav) wrote:
a single 13K.v2 in a ported box tuned to 30hz will give you just what you want out of a sub and that sub with the forum discount is only like $75 I think?
Thats for the 13kv, i dont konw what it is for the 16kv, or if there even is a discount for that one.
however if u want the highest strand count (higher strand makes for much more flexible wire), and a VERY good price on it, knukonceptz.com will be the way to go... no local store is going to be as cheap as them...they're going to try and sell a name, saying Stinger and RF wire is higher quality or some crap like that
On the other hand....you have other fingers.
I just bought a 20 inch widescreen ultrasharp flat pannel..I'm going to have to subscribe to the high quality porn places now......damn
JL if you come back on this thread can you tell me what(if any) discount this forum gets on the 16kv's? Or maybe direct me to a site that shows the discounts?
if Alex Lindeman is around he will link you, he is employed by eD, if i get home tonight and get online and no one has helped, ill link you, i saved the llink on my computer at home, im at work right now
On the other hand....you have other fingers.
I just bought a 20 inch widescreen ultrasharp flat pannel..I'm going to have to subscribe to the high quality porn places now......damn
http://www.edesignaudio.com/groupbuy.php
On the other hand....you have other fingers.
I just bought a 20 inch widescreen ultrasharp flat pannel..I'm going to have to subscribe to the high quality porn places now......damn
Ok cool ty, that lowers my overall cost by about $125, cant complain bout that
but wasn't there some coupon for free shippping? like freeship or something to that effect?
back when Cadence was selling their CWM-6Kit directly from the factory freeship was the coupon code, havent heard of eD having that... Im pretty sure if they got free shipping on anything it would be stated right on that page.
On the other hand....you have other fingers.
I just bought a 20 inch widescreen ultrasharp flat pannel..I'm going to have to subscribe to the high quality porn places now......damn
Shawn, if you have some free time today, give me a call at the shop. 641.792.2501.
I would like to walk you through a few things, on some discount and deals that we can do for you. We can offer a really good package deal on the items. Possibly a little better than you think.
Elemental Designs
Performance.Mobile.Audio.
alexl@edesignaudio.com
Warehouse Manager
hey Jerk, what about me? LOL. my mother of all people is considering at least subs right now... pair of 11k's are on the bill, but the amp...well what kinda deal u wanna work out with me to keep my business with eD?
I <3 you Alex
On the other hand....you have other fingers.
I just bought a 20 inch widescreen ultrasharp flat pannel..I'm going to have to subscribe to the high quality porn places now......damn
Thanks Alex but it will be bout 2 weeks before ill have enough, its coming up so im just getting my list in order, thanks though, ill giveyou a shout when i get paid. Gotta love discounts ; )
also if you want stinger stuff. Darvex.com is the spot. Cant touch his prices.
Ok Alex told me they made components (didn't even know that
) so, going with his suggestion Ill get there 6500's and a nine.2 for those, less money = good
So lets go through this again:
2- 16kv.2's = $180 + shipping/tax
1 Nine.1 = $315 shipped
1 Nine.2 = $175 shipped
6500's = $185 + Shipping
Head Unit = (too bad ED doesn't make HU's lol) probably still get the Pioneer DEH-P6800MP for $220ish + tax/shipping etc.
Sound deadener/wireing/misc = ?? How much Sound Deadener do i need for my trunk and door panels. Also on kind of a side note, where all SHOULD i use SD? Im not about to go pull up my floor and roof to put it in, so would the trunk/door panels be ok? and for wireing i dont know what i need, can someone point me in the right direction on this issue lol. So roughly my cost should be somewhere around $1100-1300 id say is a fair bet. Still bout $300 less overall then what i thought it was gunna cost
I wish my friend knew bout this site and you guys lol. He just spent $600 on a HU i found on www.crutchfield.com for alot less, like $300 less :S, and he got 1 10" sub for almost double what these 2 16kv.2's will run me. Its a nice system, but hes spent around $1500 on his system all together and he didn't even replace his speakers yet :S Its not my place to go and tell him he got ripped off but still. Anywho, im glad i found this site before i went and spent my money lol.
With the discounts available, and wanting to use a nine.1, I would suggest a pair of 16ov2 D4's.
We are no longer producing the 16kv2s and we only have dual 2 in stock, which means you can run 2 at 2 ohm. The nine.1 will put out 900 watts at 2 ohm. Not its full potential. The 16ov2s at 1 ohm will get 1200 watts +. The nine.1 is rated at 1200 watts @ 12.5 volts. With the amp being underrated and running at 14.4 volts. We have had people pushin 1400-1500 watts all day long.
As for sound deadner we have the edead products, Before I worked for the company, I used 1 gallon of V3 liquid, and did the trunk and most the door panels. General rule of thumb is 1 gallon of liquid = about 50sq ft. and to do a whole vehicle our cars size about 100-120 sq ft. Thats everything.
If you want to use a nine.1 and nine.2 I would suggest a 0 awg kit.
http://www.edesignaudio.com/wire_product.php?productid=251
Also remember that on a stock alternator doing your big 3 might be a good idea aswell.
With crutchfield you also get the wiring harness for your cd player, thats a nice extra.
Hope that helped a little.
Alex
Elemental Designs
Performance.Mobile.Audio.
alexl@edesignaudio.com
Warehouse Manager
Arg im so confused, ok so your saying i should get 2 16Ov.2 D4's, I dont know much about electronics, so what are you suggesting i use to run 2 of those?
a Nine.1 for a pair of those is what he is saying would be a good idea...and if you might want more than one sound deadening option check out Secondskinaudio.com ALL their mats are butyl based... not bashing eD by any means here Alex, just presenting more options
On the other hand....you have other fingers.
I just bought a 20 inch widescreen ultrasharp flat pannel..I'm going to have to subscribe to the high quality porn places now......damn
Ok ty JL, well seems im back where i started price wise lol thought i was gunna save a few bucks now im +$150ish bucks for the added cost of the Ov's rather than hte Kv's
Oh well no biggie, solong as it sounds awsome lol
Ov2s are like the big brother of Kv2's. You will (or would if you had them) notice a difference between Kv's and Ov's. Not that Kv2's are bad, just Ov2's are different.
JLAudioCavalier(1bad02cav) wrote:a Nine.1 for a pair of those is what he is saying would be a good idea...and if you might want more than one sound deadening option check out Secondskinaudio.com ALL their mats are butyl based... not bashing eD by any means here Alex, just presenting more options
ALL our mats have been butyl based with a non asphalt filler for a few months now, and the SE^2, our thicker stuff has been butyl since january of this year.
We are developing some new stuff aswell, very thick.
secondskin makes a great product.
we offer the forum discount on of V1 for 80cent a foot and V1se^2 for $1.28 a sq foot.
Elemental Designs
Performance.Mobile.Audio.
alexl@edesignaudio.com
Warehouse Manager
