Ok so I have a few questions.

1. with the drivers air bag disconnected and passenger connected if I put the fuse back in will it deploy the passenger one when I turn the car on?

2. With passenger air bag connected will it deploy when testing the resistor on the drivers in hope if getting rid of the air bag light?

3. Does it matter what way the resistor is facing on the wires?

4. Where can I find a resistor online with the pattern red red gold gold with 2.2 ohm 1/4 watt +/- 5% Like this one.



I just don't want to deploy the passenger air bag and @!#$ up my dash and windshield.




Edited 3 time(s). Last edited Monday, January 15, 2007 8:16 PM

Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

1 no
2 no
3 no
4 ebay

Any other place that doesn't require paypal?

I'm still in a legal fight with paypal over fraud charges from almost 2 years ago now. So yeah that account is locked up pending on paypal to say ok your right you didn't make those charges when you were in boot camp.



Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

First one on THIS list.

And what he said up there was right

-Seth

Or better yet check HERE.
They look like they'll be in stock. Mouser is out of stock for those.

It's a pack of 100 but hey, get those and do a group purchase or somethin, lol.

-Seth

Thanks guys

1 more question. With the driver air bag out will the passenger still work if in an accident? With and without the resistor in to fake out the system.



Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

Yep, should.

But i'd still do the resistor thing.

-Seth

Once aI get taht bundle of 100 I will test them make sure they are right. After that for a small fee of a envelope and stamp I can send them out to whoever. So pm me if you would be interested in these.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

If you install the resistor in place of one airbag and the light is out, the other bag will still work in an accident. If the SRS light is on for any reason, none of the installed airbags will work.

Oops, any airbag deployment loop that is still connected to a working SDM can still deploy in an accident, so even without the resistor, the other bag should work. My bad!