so i was looking at rksport because their products are great, and of course expensive up the butt. but they want almost 600 dollars for a custom subbox that is carbon fiber.
http://rksport.com/main/part_detail.asp?itemid=512&appid=110&mdid=2&catid=4
where can i get a fiberglass one that looks similar made for tons cheaper? i dont want to spend much more than 200 on the box?
"What we do in life, echoes in eternity"
you better look again that is 600 for the fg box
and it's not even a box. thats just a facia. you have to build enclosures behind it for your subs.
car audio noob since 1984.
You want a full enclosure that is custom made for your back seat area out of fiberglass for less than $200 without making it yourself? You are cheaper than cheap dude. Look into custom built enclosure prices before trying to think someone would EVER be able to make and sell one that cheap. For $200 you can get a decent quality generic rectangular box for the trunk, nothing custom....
On the other hand....you have other fingers.
In my family we teach that boys have a God-stick and girls have a Shame Cave. -John Stewart
JLAudioCavalier wrote:You want a full enclosure that is custom made for your back seat area out of fiberglass for less than $200 without making it yourself? You are cheaper than cheap dude. Look into custom built enclosure prices before trying to think someone would EVER be able to make and sell one that cheap. For $200 you can get a decent quality generic rectangular box for the trunk, nothing custom....
this^^ i will probly be spending about 150$ to build one of my boxes my self that is just a slot port with kerfed port. so thats just materials! your going to have to do it yourself in order to get it at that price!
click sig for my car audio videos
150 for materials? $50 for mine and I have enough stuff left over for another box.
TheSundownFire (JBO Chat) wrote:150 for materials? $50 for mine and I have enough stuff left over for another box.
mine theres about 50-60 in wood alone then you need glue, fiberglass resin, paint or carpet, screws, nuts and bolts for terminals, ect. theres alot that goes into a finished box. you might not think so but alot of little things get put into it.
click sig for my car audio videos
The OP doesn't give a crap about your slot port kerf reverse angle doflunkle box. 50 bucks for wood, screws, glue, and a piece of PVC. Done.
Your car may do 13 sec @ 103 mph, but my car does 146db @ 35 hz.
Lanman31337 - Cavfire wrote:The OP doesn't give a crap about your slot port kerf reverse angle doflunkle box. 50 bucks for wood, screws, glue, and a piece of PVC. Done.
I was making a reference. as in if my box will cost that much then his will cost about the same if not more because of the complexity. settle down. also if sundownfire wouldnt have asked i wouldnt have broke it down like that.
click sig for my car audio videos
Why do that, when you can build one and carpet for around 50 bucks?
Your car may do 13 sec @ 103 mph, but my car does 146db @ 35 hz.
alright this thread should be closed, too much fighting over a stupid box
"What we do in life, echoes in eternity"