Part Number: ACC-74565

I saw a few posts with LD9'S that had this afpr but im not sure if it fits with no modifications? I was going to drill out the stock FPR and rely on my Begi; but rather not. So does anyone know if this one fits with no modifications at all?

My brother bought it from summit, we tried to put it on his eco but it didnt work. Wandering if it would work on my car so I can get it off him.



http://store.summitracing.com/partdetail.asp?autofilter=1&part=ACC-74565&view=16383&N=700+400020+303707+0

Yes, it is a direct bolt on for the 2.4L. I actually had that same one for a while until it started to go whacky, and had to send it back to Summit.



2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R

Yes it will work on your car. Alot of us are using them, although some have had problems as did Luke.


Car is for Sale!Supercharger kit is for sale!

Yes it will work, I have that one.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

I believe the ECO's use the 74566


-

"Youth in Asia"...I don't see anything wrong with that.

1 fits the eco , the other the 2.4

ive got 1 in mine , works great

well sweet F%$k man, looks like you are in luck, you will get that base pressure down, get your fuel milage back, and then you can hit the dyno and get a good tune, cheers


HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED

I actually have the one for the ecotec, 74566? Does anyone know if it would work on the 2.4 because it didnt work on my bro's car (eco); started leaking.

bump

you should get the one meant for your car, although im sure you can get the other to work...



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|

Nope, the 74566 won't work...Bolt hole is on the opposite side of the LD9 fuel rail...you would have to fabricate a new mounting bracket for the FPR...sorry bro.

Did you use any kind of lubricant, such as petroleum jelly (vasaline), to ease the o-ring into your brother's Ecotec fuel rail? I did that for my LD9 and it hasn't leaked yet. Maybe you damaged or have a damaged o-ring. Make sure you bolt it up too, if you may have possibly forgotten before.


-

"Youth in Asia"...I don't see anything wrong with that.