I'm looking for some suggestions, maybe there is something I've overlooked.. I was looking at a zietronix or an innovative.
LMK what you guys are using on your boosted apps
------------------------------------------------------------
I was wondering about the innovative, ive seen some great deals on ebay. I too was wondering what a good wideband is. I have only heard about the aem uego and the owner said he liked it.
i have both the hand held and stand alone widebands from innovate , and they are very good , and have a wide working range
the older aem wideband , only went to 11 new 1 goes to 10 , its a good unit
Innovative > AEM, I have an AEM and I do not like it... 2 of my friends have Innovative, and they are both having good luck.
HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED
what about the autometer widebands? phil
The autometer one is pretty cool. The specs on it say 10.0:1 but when you call them and talk to the engineering dept. they say it reads to 9.0:1 when on pump gas which is awesome. Also the Autometer one has the ability to adjust what the gauge thinks is Stoick (very cool option). I dont have one but I know someone who does and they like it.
I myself have had the AEM from when it first came out so I have the old version which only goes to 11.0:1 which i wish it went lower however dependability wise its great. Not once have I had a problem with it. My brother has the newer version and its all made of plastic where as mine was all metal. We live in AZ and well his LEDs started to go out on his so we took it out to investigate and believe it or not the AZ heat was melting the gauge from the inside out. Pretty narly to be honest, lol! Digital part still works fine.
ASE Master Certified Automotive Technician
What about the Bosch sensors not reading as accurately as the NGK?
fortune cookie say:
better a delay than a disaster.
which widebands have it so you can mount a gauge in your gauge pod? the xd-16 from innovate looks like it can be done but i want the gauge face to match up with my other ones
I think Im also gonna go with the innovate wideband, ill let you know how it goes brandon.
sscavalier wrote:I think Im also gonna go with the innovate wideband, ill let you know how it goes brandon.
I've been in contact with the guys from the link I posted and they seem pretty cool...I'm looking forward to getting my wideband next week.
My buddy has an AEM Eugo on his Focus, and he loves it.
Brandon Powell wrote:http://cgi.ebay.com/ebaymotors/INNOVATE-MOTORSPORTS-LC-1-WIDEBAND-O2-LAMBDA-CABLE-UEGO_W0QQitemZ250085987174QQihZ015QQcategoryZ6755QQrdZ1QQcmdZViewItem
I just bought mine for 150 plus shipping from these guys. Just make them an offer of 150.....best deal on ebay
I checked out your link....I dont think that comes with the digital gauge
FlipSpeed wrote:Brandon Powell wrote:http://cgi.ebay.com/ebaymotors/INNOVATE-MOTORSPORTS-LC-1-WIDEBAND-O2-LAMBDA-CABLE-UEGO_W0QQitemZ250085987174QQihZ015QQcategoryZ6755QQrdZ1QQcmdZViewItem
I just bought mine for 150 plus shipping from these guys. Just make them an offer of 150.....best deal on ebay
I checked out your link....I dont think that comes with the digital gauge
nope....you wont find any kit under 200 with a gauge included...you need a pc or purchase a gauge seperately. innovate sells this kit on their site for 200 so if you buy from the same guy i did, you save yourself about 42.00. I will be connecting mine to my laptop....no gauge needed.
Love my AEM UEGO. The face shows up to 11:0 AFR but the didgital read out goes to 9:0
-Aaron-
Your AEM goes to 9.0:1 on the digital display?!!!!!!! How long have you had that one? If it does then they must have revamped the gauge yet a THIRD time.
1st version digital readout went to 11.0:1
2nd version digital readout went to 10.0:1
3rd version apparently goes to 9.0:1..........................................
all of which the oscillating portion only goes to 11.0:1
lemme know
ASE Master Certified Automotive Technician
ive been wondering about the ngk one, ive read pretty good things about it on other forums.....
I got my AEM all wired up, sitting on my dash (no place in my pod to mount it haha), just need to weld in the bung and plug in the sensor and I'll be good to go. I have the silver bezel and face on mine, matching the rest of my gauges.
14.330 @ 96.37mph
