Meth injection questions - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Meth injection questions
Tuesday, July 01, 2008 11:39 AM
Hello all

About to get a M45 kit

I was wondering what experiences you guys have with the Cooling Mist Meth Kit? Im looking at just the basic one they sell?

Any feedback on them?

Also what mounting options have you guys used? I know of the Throttle Body spacer option. Also just mounting the nozzle in your Intake which isnt good for the TPS apparently

Anyone tap the blower after the TB ?

Any other options?

Thanks for any feedback




Re: Meth injection questions
Tuesday, July 01, 2008 11:47 AM
I haven't run one personally but I have seen many people post success with the TB spacer. Make sure you get a boost switch for it.

Where are you gonna mount the pump and tank? The trunk?

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
Re: Meth injection questions
Tuesday, July 01, 2008 4:12 PM
I love it, its the only mod I installed in between the 2007 and 2008 JCO Bashes and I went from a 14.98 to a 14.47.

I got the deluxe 150 psi + tank kit (http://www.coolingmist.com/detailmain.aspx?pid=01250TBF).

Easy install, I have the pump and tank in mounted in the trunk, the hoses run under the car to my engine bay, and into a tapped ebay TB spacer. I just buy methanol and distilled water and mix it 50/50 myself and put it in the tank, cheaper than the name brand boost juice stuff. I tinkered with the methanol allen key settings on the boost switch between every run at the track and when I ran my best time stopped playing with it. I believe it is a half turn for 1 psi so I have mine pretty much set to 1-2 psi.

If you need any more help add me on msn as I just installed this about a month ago.


______________________________________
2002 Pontiac Sunfire GT - Supercharged - 14.47 @ 94.56 1/4 Mile

Re: Meth injection questions
Tuesday, July 01, 2008 4:39 PM
just buy the switch from them, the rest can be had at McMastercarr for FAR less cash.


water injection is a MUST with a Eaton.


Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: Meth injection questions
Tuesday, July 01, 2008 5:43 PM
Did you buy from them Chris?

Can i get everything from them?



Re: Meth injection questions
Tuesday, July 01, 2008 5:46 PM
I was looking at their site but not sure of what parts i need





Re: Meth injection questions
Tuesday, July 01, 2008 7:58 PM
eeh just spend the $200 on the deluxe kit, thats what i got mine for, works great. $200 isn't that much anyway and plus it comes with all you need.




Re: Meth injection questions
Tuesday, July 01, 2008 9:25 PM



the Nozzles are on page 2033 of McMaster, OR do a search for "nozzle"

Ill have to dig up were to get the pump latter, its bed time....

Chris





'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: Meth injection questions
Tuesday, July 01, 2008 10:37 PM
Please do Chris as i would like to save as much money as possible



Re: Meth injection questions
Wednesday, July 02, 2008 1:55 PM
yep good stuff.

buy the extra injectors from mcmastercarr for a 1/3 of the price.


good luck




Re: Meth injection questions
Wednesday, July 02, 2008 5:58 PM
Viral (Kris) wrote:I love it, its the only mod I installed in between the 2007 and 2008 JCO Bashes and I went from a 14.98 to a 14.47.

I got the deluxe 150 psi + tank kit (http://www.coolingmist.com/detailmain.aspx?pid=01250TBF).

Easy install, I have the pump and tank in mounted in the trunk, the hoses run under the car to my engine bay, and into a tapped ebay TB spacer. I just buy methanol and distilled water and mix it 50/50 myself and put it in the tank, cheaper than the name brand boost juice stuff. I tinkered with the methanol allen key settings on the boost switch between every run at the track and when I ran my best time stopped playing with it. I believe it is a half turn for 1 psi so I have mine pretty much set to 1-2 psi.

If you need any more help add me on msn as I just installed this about a month ago.


I am definately ordering this my next pay check after I get my suspension on...I could only get a 15.01 out of my car (with a bad 60ft)...even if I can knock 2 tenths off my 1/4 mile I'd be happy.




Re: Meth injection questions
Wednesday, July 02, 2008 6:00 PM
I'm gonna go with the cooling mist deluxe kit too..its pretty cheap and no messing around.



Re: Meth injection questions
Wednesday, July 02, 2008 7:06 PM
I love my coolingmist kit except for the issue I am having with the progressive controller. See the link below.

http://www.j-body.org/forums/read.php?f=40&i=153306&t=153306&p=1



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Meth injection questions
Wednesday, July 02, 2008 9:20 PM
if you had the m62 i would say see what that nipple on the TB adapter plate is all about.. m45 maybe you could use a tb spacer and use that for the injection? i was looking for some the other night, found some for around 100.. too much for me so ill just be tapping the adapter plate right after the TB



12.33 @ 111.67 mph [Oct 2009]
Dyno'd on 08/02/09 - Mustang Dyno:
327.6 WHP 333.6 WTQ [10.1 AFR]
Re: Meth injection questions
Wednesday, July 02, 2008 11:30 PM
What size nozzles you guys ordering?

Im guessing m4 and m5?

Thanks



Re: Meth injection questions
Saturday, July 05, 2008 1:31 PM
I had one of their dual stage delux kits on my old SRT-4 running a 1.8 gph nozzle and a 3.2 gph nozzle. With simply turning the system on, the car gained 15 whp!! I never even got to tune the air/fuel mixture to really take advantage of the setup! I'm looking into putting a similar setup on Wagonstein!


.
91 Cav "GT"<-- R.I.P.
91 Cavalier Wagonstein - Turbocharged wagon goodness
You can take my rifle when you pry it from my cold dead hands.

Re: Meth injection questions
Monday, July 07, 2008 4:12 PM
M4 is the one for the Mp45 that i was using, worked great, M5 seemed to be a little much, but would be good if using just meth, i was using just water.

Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search