Estimated Install time for Hahn Turbo - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Estimated Install time for Hahn Turbo
Wednesday, July 09, 2008 4:57 PM
Im going to have a shop install the turbo, I REALLY don't want to have a HUGE bill for labor. Shop charges about 60/hour. What do yall think???????????????


Also, Gauges installed so far are, Stock water temp, aftermarket oil and fuel pressure, Does anyone suggest the wideband air/fuel???? If so, anyone have a cheap link????

Re: Estimated Install time for Hahn Turbo
Wednesday, July 09, 2008 5:13 PM
8-10 hours for a average mechanic with normal tools. Why not do it yourself?



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Estimated Install time for Hahn Turbo
Sunday, July 13, 2008 5:29 PM
I wonder how hard it would be for a basic knowledged person like myself????
Re: Estimated Install time for Hahn Turbo
Sunday, July 13, 2008 7:05 PM
It comes with easy to follow directions. The hardest part is the fuel pump wiring IMO.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Estimated Install time for Hahn Turbo
Sunday, July 13, 2008 8:57 PM
Hypsy (The Trucking One) wrote:It comes with easy to follow directions. The hardest part is the fuel pump wiring IMO.


x2


___________________________________________________________________

Mitsu TD06-20g |3" Downpipe w/ Cutout | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
Re: Estimated Install time for Hahn Turbo
Sunday, July 13, 2008 11:16 PM
not even a tech with one leg and a missing hand would take 8-10 hours the Hahn kits are SIMPLE installs. They may charge you 8-10 but the actual time to do it is just a few hours if you have the means and the competence.



ASE Master Certified Automotive Technician

Re: Estimated Install time for Hahn Turbo
Monday, July 14, 2008 12:13 AM
CaliforniaDomestics wrote:not even a tech with one leg and a missing hand would take 8-10 hours the Hahn kits are SIMPLE installs. They may charge you 8-10 but the actual time to do it is just a few hours if you have the means and the competence.

Yeah the install isn't so terrible. I have a HRC5 kit for sale with some extra goodies not packaged with the production kits. $3500









Re: Estimated Install time for Hahn Turbo
Monday, July 14, 2008 12:40 AM
air tools simplify any install IMO. sure as hell made my S/C install and motor install easier



12.33 @ 111.67 mph [Oct 2009]
Dyno'd on 08/02/09 - Mustang Dyno:
327.6 WHP 333.6 WTQ [10.1 AFR]
Re: Estimated Install time for Hahn Turbo
Monday, July 14, 2008 1:57 PM
FstCavZ24 wrote:
CaliforniaDomestics wrote:not even a tech with one leg and a missing hand would take 8-10 hours the Hahn kits are SIMPLE installs. They may charge you 8-10 but the actual time to do it is just a few hours if you have the means and the competence.

Yeah the install isn't so terrible. I have a HRC5 kit for sale with some extra goodies not packaged with the production kits. $3500


Dude you jack ever single @!#$ thread about anything HRC with your for sale posts. Why not put up a classifieds listing and STFU. It's getting ridiculous now with how many times you've mentioned it.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Estimated Install time for Hahn Turbo
Monday, July 14, 2008 2:14 PM
Hypsy (The Trucking One) wrote:Dude you jack ever single @!#$ thread about anything HRC with your for sale posts. Why not put up a classifieds listing and STFU. It's getting ridiculous now with how many times you've mentioned it.

Pot meet kettle...douchebag.







Re: Estimated Install time for Hahn Turbo
Monday, July 14, 2008 2:35 PM
I don't jack ever @!#$ thread @!#$. I held my tongue as long as possible but it's down right annoying now. Please find me where in this thread or any other recently that I said I sold this or that, especially a HRC post. I keep that @!#$ to PMs as much as possible so I'm not jacking up every thread.

I hope you never sell that stuff and are stuck with it forever.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

Re: Estimated Install time for Hahn Turbo
Monday, July 14, 2008 2:37 PM
First off your jacking this post right now. I added to the thread about his install question and backed a few others up on how unhard it really is to install.

When you had your little business going you were in every single turbo and HAHN thread pimping that you sold HAHN. EVERY SINGLE THREAD.







Re: Estimated Install time for Hahn Turbo
Monday, July 14, 2008 3:44 PM
FstCavZ24 wrote:First off your jacking this post right now. I added to the thread about his install question and backed a few others up on how unhard it really is to install.

When you had your little business going you were in every single turbo and HAHN thread pimping that you sold HAHN. EVERY SINGLE THREAD.


I was in the threads that said they were LOOKING TO BUY the HRC kits. If it was a post about how-to do something with the kit or what came with it or install help I didn't say a word except to help.

Do whatever you want man....I still hope you never get that stuff sold.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Estimated Install time for Hahn Turbo
Tuesday, July 15, 2008 8:38 AM
NE Way kids....
yes man you need to get a wide band pick one up off e-bay. good luck with the install bud




Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search