Im looking to supercharge my 2.2L eco but im looking at whats to best way to get power out of the engine... and would i have to upgrade my exhaust to 2.5inch exhaust have 2.25 right now.... all help is apperciated and will be used greatly...and where do u find the 3.0 pulley and heat exchange????

http://a304.ac-images.myspacecdn.com/images01/22/m_c2c3abf9e1dcd5bfd3f98988b48830ff.jpg

2.5 ftw and the 3.0 can be found anywhere. ZZP, EBAY, GM Stealership, Random Machine shops, Blown Junkyard Lsj Motors.

so i would have to change my exhaust to 2.5??? and what abt the heat exchange??

http://a304.ac-images.myspacecdn.com/images01/22/m_c2c3abf9e1dcd5bfd3f98988b48830ff.jpg

Brandon Dillow wrote:so i would have to change my exhaust to 2.5??? and what about the heat exchanger??

you don't have to change to 2.5". it is recommended to help w/ the flow of the exhaust side. getting an lsj header as well to go w/ the 2.5" exhaust. heat exchanger is always recommended for the m62 supercharger. look here in the boost section for a complete list of heat exchanger parts in a thread. good luck and welcome aboard.


____________________________________________________________________________
my carDomain updated 8/2/08 Boosted at B-day!

Okay kool thanks. going to be trying to supercharge my 03 cavalier soon


http://a304.ac-images.myspacecdn.com/images01/22/m_c2c3abf9e1dcd5bfd3f98988b48830ff.jpg

I don't know what you're running for exhaust now, but I would probably upgrade...I annihilated a cat by melting the @!#$ out of it by pushing 10psi threw the stock exhaust!


  

eh I think my exhaust is 2.25

TraJadY wrote:I don't know what you're running for exhaust now, but I would probably upgrade...I annihilated a cat by melting the @!#$ out of it by pushing 10psi threw the stock exhaust!

Yeah same here. My stock cat looked like a glob of weld after about 1000 miles @ 10psi