aight guys im looking for my friend with a 2000 z and he has a set of stock injectors from an srt4 so i did some research and found they are to long but i was wondering if anyone has used any sort of spacing method to make these work or if it is a total waste of time if anyone has run these let me know thanks
I believe somebody ran them by oval-ing out the mounting holes on the stock rail to raise it up the required length.... but it's been a while so don't quite quote me on that.
-Chris-
-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
I used to have SRT4 injectors back in the day in my 2000 Z turbo. As far as I know they are small not large at all. I hade to weld stuff to the rail to make it fit. As far as working wiht the computer, they did just find. I had injectors from a 2003 srt and I think they never change in size through the years. Is a pain to make them work if you dont have a welder available. They are smaller than the SS S/C.
state 1 srt injectors are 570's
Not sure about stock ones.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
alright cool thanks guys we do have a welder and an extra fuel rail so that should help
