I was wondering what the m62 guys are using for injectors. i will have a pretty good setup with a ported blower, 3 inch intake, ls1 TB, and a 2.9 or 3.0 pulley. Any help would be great. I know that everyone will have a different opinion, but I am thinking about using the L67 injectors.
I would say from experience with LSJ cobalts that you should go with 60 lbs/hr to be safe and have room to grow.
Minimally, go with 42lbs/hr (LSJ stage 2 injectors, i think)
best price on injectors and harnesses that i have found is @ zzperformance.com
...I am the BEST at what I do...
"I guess your right[BlueBoost]. Me and my slow car are failers."
Yes, 42's are a complete must if dropping pulley sizes. 42's are rated to something like 300hp, so you'll be good with them.
M62, 42's, ZZP 3", ZZP S3 H/E
214whp 190wtq
Im not planning anythign over 250 really, I think i might go with the cobra injectors. they are 39 LBS.
depending on where you are going to get your 250 number ie a dyno jet like I did I just used the 378cc injectors from the s/c kit with no problems.
