alright guys i just did some researching and found everyone says to run my return line back to the block not the oil pan, i dont mind pulling the pan and doing this the correct way but all the pictures i have found where to tap the block dont come up anymore, does anyone have any pics of where this is?
If you dont have an eco you cant....
"You can only feed them semen for so long before their legs fall off."
My bad! You learn something new everyday...
"You can only feed them semen for so long before their legs fall off."
Hey Jer, its right here of course! lol Ask me how I found this...?
STREET ANTIX, it's coming...
badass!!! i do have an eco p.s.
I had also decided to do this when building an ld9 lol, makes it much easier specialy for the auto guys. With the auto space on the pan is very limited for the fitting, then routing the line either goes around the tranny or in between which is very tight. Had to notch my black a tiny bit and use a 45* degree fitting.
Here's how I did mine. 1/4" NPT to 08 AN...
Project Resurrection is in full swing!
