Vue with M62 - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Vue with M62
Sunday, January 09, 2011 9:44 AM
I have a brand new GMPP M62 kit still in the box. My friends mom is selling her 2002 Saturn Vue 2.2L 5 speed manual for pretty cheap. I have looked at the engine bay and the belt setup is the same as a Ecotec Cavalier. Has anybody put this kit on a Vue? It looks like it would fit/ clear the hood. Any info would help.

Re: Vue with M62
Sunday, January 09, 2011 10:03 AM
I have not heard of anyone doing that but I think it would be dam cool. I would look into if HP Tuners has support for the vue so You could get the most out of the install when done instead of running a gm reflash.




Re: Vue with M62
Sunday, January 09, 2011 10:17 AM
Right on I have done some quick research and found differences between the Vue and the Cavalier. The Vue uses a returnless style fuel system, same as the Cobalt ss. The throttle body is also electronic vs cable. I have found that the 3.0L is cable driven and the gas pedal is the same regardless of engine. Which means worst case scenario I use a Cavalier throttle body and 3.0L throttle cable or Cavalier if it fits. I will check with HP Tuners to see if they support the Vue and the electronic throttle body.
Re: Vue with M62
Sunday, January 09, 2011 12:36 PM
OK looks like the injectors are also different. Most likely I will have to swap them from a Cavalier. Current Idea is to use Cavalier fuel injectors, throttle body, throttle body cable and ECM. Anyone want to chime in here? HP tuners does not support the VUE.
Re: Vue with M62
Sunday, January 09, 2011 12:51 PM
Looks like the 04-05 VUEs come equipped with the same injectors as the Cavalier 03-05.
Re: Vue with M62
Sunday, January 09, 2011 2:47 PM
Anybody have links to the ECM pinouts on a 03+ cavalier and a 03-05 VUE?
Re: Vue with M62
Sunday, January 09, 2011 8:06 PM
The 2.2 is not supported by Hptuners only the 3.5 (09) and the 2.4 (08-09). So you'll have to go with a standalone ecu like a haltech to make it work.


Unless you want to re-wire it to work with the cobalt ss computer or any other GM 4 cylinder computer thats not a cavalier one (besides the 00-02 ld9/ln2 with s/c reflash)..


Edited 1 time(s). Last edited Sunday, January 09, 2011 8:07 PM

1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Vue with M62
Sunday, January 09, 2011 8:10 PM
Thats what I was looking at doing. I was thinking that regardless of style of fuel delivery (returnless or return) as long as I remove the electronic throttle body and replace it with a standard Cavalier throttle body I should be able to use the Cavalier ECM to run the engine. I was looking for the pinouts so I can see if any of the wires need to be moved. The only thing that I can think of that won't work is the cruise control which the VUE ECM controls.
Re: Vue with M62
Sunday, January 09, 2011 8:12 PM
DO NOT USE THE ECO CAVALIER PCM!!!!!!!!!!!!!!!!!!!!!!!!1!!!!!!!!!!!!!!!11!!!!!!!!!!!!!!!!!!one!!!!!!!!!!!!!!!!!eleven!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Jesus Christ you have choice of PCM's and you pick the worst one that you could. Never use an eco cav pcm in a boost application if you can avoid it.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Vue with M62
Monday, January 10, 2011 11:01 AM
What would be the reason my GM reflash would work. I was thinking about using the Cobalt SS ECM but I am having trouble locating one. Either way I need more information before I invest a few grand into this project.
Re: Vue with M62
Monday, January 10, 2011 11:46 AM
The eco reflash? It would sure as hell not run the dash and the reflash sucks. And using an ld9 pcm with the 2 bar s/c flash will likely take way too much wiring to make work.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer

Re: Vue with M62
Tuesday, January 11, 2011 8:30 AM
LD9? This is for the 2003-2005 Cavalier with the Ecotec engines, the same engine that is installed in the Saturn VUE. I understand that the reflash is not the best from a performance standpoint however the Cavalier I had with the reflash worked without a hiccup and ran hard. Besides the cruise control I don't see why the Cavalier ECM will not run the VUE. The only reason I would choose this route is so I can get it reflashed from GM and keep my costs low.
Re: Vue with M62
Tuesday, January 11, 2011 8:36 AM
Dors that year have a maf and what crank trigger wheel out runs.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search