Hey everyone, I kinda got a tight squeeze to fit my internally wastegated turbo into my z24, I ran across a type of flange on ebay a while back that replaced my normal one that houses the swinge valve, and actually had a tight 90 degree angle to the exhaust, this would work excellent, but I cant find any more now. Does anyone know where I could find this perfect piece???
Thanks

It has a flange on it? Or do you just mean a silicone elbow? Let me know, maybe I can help you out




MaximumBoost.net
1-888-TURBO-31
sales@maximumboost.net

TAX ID: 45-8013458577-3

Hes talking about a OEM style downpipe that came on a specific turbo-charged vehicle from the factory. It has the swing-valve assembly, Primary 02 sensor and the 90 degree downpipe all one peice (made out of cast iron). Unless you know what kinda of car it came off of, you should look for a different idea.

it wasnt a full downpipe, it was just the elbow that replaced the stock piece which holds the swing valve, rather than coming straight out it turned 90 degrees. the end of it had the same three bolt pattern as the stock one too. 1 I was looking at was for an older thunderbird but I'm not sure if it was the right 1 or not.

I bought a 3 bolt exhaust flange off ebay--- Make your own pipe...



<img src=http://registry.gmenthusiast.com/images/reddevil/Devil.jpg>

I've already ordered 2 flanges off of ebay, both were the wrong size although I ordered the right size, and now that I realize how cramped it is I would like to use this cast piece because it cuts down on a little radius