Has anyone fitted integra seats into their cavy? I hate the stock cavy seats and i have two 96 integra seats that i can use.

If anyone has done this, please tell me how. Did you weld the cavy sliders/mounts to the integra seats or something?

Thanks

I had a set of 240 sx seats in my cavy at one point.

I made a bracket that bolted to the sliders on the seat, and directly to the floor, but im sure you can use the cavy sliders as well...

just make sure before you do any work that the seats arent too wide for the space...

i had integ seats in my last cavy. the width is perfect. can be bolted to the stock rails, but just need some adjustments to line up the bolts right.

you're gonna need to weld some tabs to make the bolts fit

It's not hard. and it's doable.

I have DSM seats in mine, I just used some steel flats and drilled holes, stuck some bolts through, welded them up. Those bolts went through the DSM sliders. Then drilled more holes in the stock pattern and bolted the whole thing to the stock bolts. Extremely easy if you can weld. They sit WAY lower than stock.



Listen F***ers. FASTERTHANAHONDA is a joke because I WORK FOR HONDA. I'll talk @!#$ about Fords to, that doesn't mean I can beat a 12 second mustang.

Teggy seats = awesome. Try finding 89-91 Civic Si, or CRX Si hatch seats. basically Recaro buckets.



My Cav
I give up...
i'm buying a VW those people love trees, so they should love eachother too... "Andy"

people sell the 2000+ civic SIR hatchback seats for about 300-350 CDN a pair.

Get those. those anre @!#$ money.