Hey!
I have my whole cluster apart and I am looking at the bulbs inside. What size LEDs should i get to replace the stock bulbs with?
By the way, I will be posting a HOW TO on this once i get the right sized LEDs.

brandon schnupp wrote:Hey!
I have my whole cluster apart and I am looking at the bulbs inside. What size LEDs should i get to replace the stock bulbs with?
By the way, I will be posting a HOW TO on this once i get the right sized LEDs.

You da man!


My Fquick Page

anyone?

Good luck getting the needles back on in the right positions and working. Def interested in the write up if you don't mess anything up. Not saying you will just from the threads I see damn near everyone ends up breaking them doing this.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

Lol i have no problem putting them back in the right place. I will show you a way in the write up. Im just wondering what size LEDs i should use. Wondering if i should throw some wide angle 3mm in there or some #74 in there,

TTT

when i pulled all the needles off on my cluster.

i had my roomate drive his car next to mine with the cruse set at 55mph, i stayed right next to him, and pushed the needle back on 55mph while driving.







Portage, MI

i beleive their 194s.. if u get em get the 5 leds in one.. those will give u a brighter and fuller cluster..

-ruen- wrote:when i pulled all the needles off on my cluster.

i had my roomate drive his car next to mine with the cruse set at 55mph, i stayed right next to him, and pushed the needle back on 55mph while driving.

Yes, but ruen you have a 99... he has a 2002. The 00-05 clusters are different... if you pull the pin out of the gear pack, it's damn near impossible to get it to line up properly afterwards...

If you can get the needle off without pulling the pin out... on all of the gauges... then awesome! Easy to put back together... but everyone I've seen do it, breaks off at least one... usually the tach. I broke all four on one cluster

Once you pull the needle out... it's usually a garbage cluster. I've managed to fix ONE out of about ten now.

call alex at black cat customs he will be able to answer that!

I have had no problems at all!!!
Ive tried with 3 clusters and no problems yet...
I just need to know the size of the leds that are in the cluster.!!!
They look to be #74s but im not positive yet.

If you've got it taken apart, couldn't you use just about what ever LED you want. If it were me, I would use these.
http://www.besthongkong.com/product_info.php?cPath=7&products_id=181
In fact, if your steps for removing and replacing the needles look easy enough then that's exactly what I'll use.