I have a problem, the previous owner of my car tinted the windows, with the stick on crap, and the problem is, it started peeling off badly. And i know i can just take a razor blade to most of the windows, but the back window has the defrost stuff, how do i take the tint off, without the defrost coming off too? and suggestions?
Thanks
Under Construction, should be finished before years over...
Corey
i know this sounds stupid but when my back window was bubbling up really bad i took a razor blade to the corners and once i had the tint down to the defrost lines i took AIRCRAFT REMOVER to the rest of it and it didnt harm the defrost lines i u do it right it shouldnt hurt anything but like i said u have to be very careful!!!! just figured i would give u a little advice.
hondas are like tampons.....every pu$$y needs one...
mildly built 99' ln2, eagle h-beam rods, wiseco forged alum. pistons, cusco oil catch, t3/t4 super 60 garret, tial 40 mm wastegate, hp tuners, prothane mount inserts, 2.5" exhaust.
If worst comes to worst, take it to somewhere that does tint and have them remove it?
alright thanks guys
Under Construction, should be finished before years over...
Corey
trash bag and simple green. Worked great for mine. And you need either a heatgun or a hot day (lots o sun) Spray the trash bag with simple green, press against inside window until it sticks. let it heat up, peel away softened glue/tint.
the tint adhesive is designed to be removed with ammonia (windex,) so says my tint guy
thanks, ill try ur guys ideas, gotta get the car in the garage one day here, its too god damn cold out now
Under Construction, should be finished before years over...
Corey
