Nothing big, just decided to make this gauge holder for my steering column. Ive been bored since I have nothing to do now besides waiting on my freaking HpTuner credits to come in grrr..
Anyway, Just 3 pics, I have progress pics for those interested I could post up.. Ill probably add a fuel pressure gauge here. That A/F gauge is just in there for mockup.. This was my first ever fiberglass project btw
C&C welcome
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
looks good, i like how it sits to the side of the speedo. so you can see like regular driving speeds. i like it
---
i agree with him^^^looks good that its offset.
I think it hides your tack/speedo.
1996 Chevrolet Cavalier SOLD | 2002 BMW 330i SOLD | 2004 BMW 645i
great job man, looks good- and fuctional. nice work
Thanks guys..
As far as the mounting, it really doesnt hide nothing.. Not a thing to just lean up and see what my tach is idling at
It only hides the high side of my MPH, I wont be spending much time on that side of the numbers anyway
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
That looks good. I woould have painted the housing black though.
I want to put my boost gauge there. Did any company make a top that was molded for a gauge there? I could have sworn you used to be able to buy a replacement top that was made to fit a gauge, but I have no idea where I could buy one. If anyone has one for sale or is willing to make me one PM me.
Edited 1 time(s). Last edited Tuesday, September 11, 2007 12:51 PM
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
Thanks Wade.. Ive never seen something like this offered for the Jbody, but I think Ive seen someone make one a while back on here.. I actually thought about buying a professional made one from another vehicle from Jegs and just cutting the bottom half off of that and somehow try to mold in how it sits on our steering column now.. But obviously went a different route
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
StikiGreenZ wrote:I think it hides your tack/speedo.
i agree.. but really anyone that can drive an Auto or even Stick for that matter.. WHats a Tackometer??
I just listen to the Rev's!!
ahhaha
GOT ECOTEC?
StikiGreenZ wrote:I think it hides your tack/speedo.
since when do you have to go faster than 90? except at a track when the give you your speed anyways. and for the tac, he has an auto. that doesnt matter a whole lot. looks real good. nice work
I think I would have put the boost gauge there, but looks good anyway.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
Primer Beast (TGM) wrote:StikiGreenZ wrote:I think it hides your tack/speedo.
since when do you have to go faster than 90? except at a track when the give you your speed anyways. and for the tac, he has an auto. that doesnt matter a whole lot. looks real good. nice work
Lol Exactly, thats what I was trying to say in my first post haha..
Skunk v.2K4-That gauge there now was just for Mock up, I think Ill be putting my Fuel pressure gauge there once I move all my gauges around over the winter.. Left A pillar is going to be AEM WB, Boost, Oil pressure. On my radio\vent bezel are going to have Trans temp, and volt meter..
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
Hotness!! Love it David!!!
Go Go OG Traction!!
Looks great bud, interior looks well done.
thats where I have my boost gauge on my car
Looks good! I was thinking of contacting autometer, or any other pod place, and see if they could use mine to make ABS ones.....
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
